I’ll verify the current part metadata, locate and query the official ST datasheet, compare every symbol pin and footprint pad/land-pattern dimension, correct the datasheet property, then record the audit and any mismatches.
The official ST source is identified. The 12 pin numbers/names match the datasheet, while the stored manufacturer, datasheet link, description ODR range, and symbol electrical metadata need correction or qualification; I’m applying the metadata fixes and documenting the footprint comparison now.
Evidence note: the official PDF URL was identified and stored, but the datasheet evidence service could not serve citation handles for this file. Detailed extraction was checked through a readable mirror of ST's DS12422 Rev. 7. Values below should be revalidated if ST publishes a newer revision.
Part informationKey specifications
Supply: VDD 1.62 to 3.6 V; independent VDD_IO supply.
Reviewed the LIS2DU12TR metadata, all 12 symbol pins, footprint geometry, and model metadata. I updated the manufacturer to STMicroelectronics, set the official ST datasheet URL, added the LGA-12L package, and corrected the description to 1.6–800 Hz ODR.
Flagged issues
All symbol electrical pin types are unspecified and pin descriptions are missing.
Footprint is incorrectly tagged through_hole despite using SMD pads.
Exact mask/paste compliance still needs validation against ST TN0018.
Pin-1 visibility and STEP-model alignment should be visually confirmed.