Part Datasheet Review
Worked for 56 sec
Assigned
Terminal Order and Pin Orientation across all 115 terminals: power is Top / 1, ground is Bottom / 10, RF/control/GPIO are on the left, and SIM/UART/RFFE/NC are on the right. The component review checks came back with no open errors, warnings, or uncertain findings.Open items:
- The rendered schematic image was not visually useful due to zoom/positioning, but structured property verification and component review checks passed.
Suggested next steps:
- If desired, I can clean up the visible schematic symbol placement/spacing next.
- Publish/version the corrected part for library reuse.
Thought for 5 sec
I’ll assign broad
Pin Group and matching Section values across all 115 terminals, keeping each pin in exactly one functional group per your convention, then verify a representative sample.Worked for 3 mins 53 sec
Added broad
Pin Group and matching Section metadata across all 115 terminals. Groups used: Power, Ground, RF, SIM, UART, RFFE, Control, GPIO, and No Connect.Open items:
- Flux showed autocomplete warnings for some broad labels, but the values were applied successfully and match your convention that
Section = Pin Group.
Suggested next steps:
- Run the component review checks again.
- Publish/version the corrected part for reuse.
Review and publish
Run review checks
Publish corrected part
Check symbol readability
Update review file
