Pin Function Audit
-
Make the functional group more general.
-
Add a Section property to all pins, and apply the same value used in the Pin Group property to each pin's Section property.
Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10. For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation.
Thought for 10 sec
I’ll consolidate the existing detailed groups into broader functional categories, mirror each Pin Group into Section, and assign group-level orders 1–10 with Power first/top and Ground last/bottom. The remaining groups will alternate Left and Right for a balanced symbol.
Worked for 5 mins 33 sec
Updated and verified all 129 pins across 10 general groups. Each pin’s Section matches Pin Group, orders run Power = 1 through Ground = 10, and orientations are balanced between Left/Right with Power on Top and Ground on Bottom.
Fix pin metadata
Check symbol rendering
Verify footprint geometry
Run part review
