Part Audit Mismatch
Thought for 5 sec
I’ll audit the part metadata, locate the official Vishay datasheet if needed, update the Datasheet property, then independently compare the symbol, footprint, and pin descriptions against it.
Thought for 5 mins 39 sec
Thought for 7 sec — Inspecting properties and skills
Referenced guidance.
Thought for 12 sec
Thought for 7 sec
Awaiting 1 background task
Thought for 16 sec
Reading Inductor Part Audit's report…
Received notification from "Inductor Part Audit" that it finished — picking the work back up.
Thought for 13 sec
The audit is complete; I’m reconciling its report with an independent read-back of the part metadata and footprint before closing.
Thought for 40 sec
Audit reconciled and Datasheet updated to the official Vishay URL: https://www.vishay.com/docs/34291/sc806az1.pdf. The MPN and electrical specs match, but the footprint land pattern is critically oversized (3.25 mm span versus Vishay’s 2.3 mm), so the part is not safe for fabrication as-is; details are in the Part Audit Report.
Fix footprint and symbol
Review corrected footprint
Create fabrication note
