Part Audit Review
Thought for 5 sec
I’ll audit the part metadata, locate the official datasheet if needed, update the Datasheet property, then cross-check the symbol, footprint, and pin definitions against the manufacturer documentation.
Thought for 20 sec
I’m reading the current part definition and package geometry first; I’ll only change the datasheet link if it is absent.
Thought for 1 min 54 sec
A datasheet URL is already populated, so no link update is required. I’m now validating that document against Renesas’ official package and pin data.
Worked for 4 mins 14 sec
Created a project doc
Part Audit Report
Part Audit Report
Scope
Audit of the ICM7555IPA part metadata, schematic symbol, footprint, and pin definitions against the official Renesas ICM7555/ICM7556 datasheet (FN2867 Rev.10.01, March 5, 2020).
Official source: https://www.renesas.com/en/document/dst/icm7555-icm7556-datasheet
Current Part Information
Ordering-Code Finding
The official 2020 Renesas ordering table lists ICM7555IPAZ, marked
Key Specifications7555 IPAZ, in an 8-lead Pb-free PDIP package (E8.3). It does not list ICM7555IPA as a current orderable code. ICM7555IPA is best treated as a legacy/non-RoHS identifier. The electrical pinout remains compatible, but sourcing metadata should distinguish the legacy code from the current ICM7555IPAZ code.Audit complete. The datasheet property was already populated, so it was not changed; the symbol pinout matches the Renesas datasheet.
Key flags:
ICM7555IPA is a legacy code—the current orderable PDIP is ICM7555IPAZ; package/mount metadata and pin descriptions/types are missing; and the footprint row spacing may differ from the 7.62 mm nominal specification. Full details are in the Part Audit Report.Fix metadata and pins
Verify footprint geometry
Use official datasheet
Check 3D alignment
