Part Datasheet Audit
Thought for 12 sec
I’ll audit the part metadata and geometry, source the official datasheet if missing, update the Datasheet property, then cross-check the symbol, footprint, and pin descriptions.
Worked for 2 mins 19 sec
Audit complete. The existing Datasheet URL is already set to a Semtech-hosted document, so no update was necessary.
Key specs
- HS2950P.M high-side HotSwitch/load-protection IC
- 2.7–29 V input, up to 5 A output
- 25 mΩ typical on-resistance
- Adjustable current limit, UVLO, OVP, turn-on delay, and soft-start
- DFN-12, 3.0 × 3.0 × 0.55 mm, with separate VIN/VOUT thermal pads
Mismatches flagged
- Part Type is incorrectly set to Electromechanical Components; it should be a power-management/load-switch IC.
- Library classification also identifies it as Logic / AND, which is incorrect.
- The symbol’s 14 terminals correctly represent 12 leads plus two thermal pads, and the pin-number/name mapping matches the datasheet.
- All terminal Pin Types are “Unspecified,” and detailed Pin Descriptions are missing.
- No explicit Package property is set.
- Copper pad pitch and dimensions match the recommended land pattern, but the pin-1 silkscreen marker has been displaced far outside the footprint by a layout override.
Fix metadata and labels
Correct part metadata
Add pin descriptions
Fix silkscreen marker
Run ERC DRC
