Review all available part information (MPN, packag...
Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10. For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation.
Thought for 9 sec
I’ll assign each functional group a consistent Terminal Order and Pin Orientation, with Power at order 1/top and Ground at order 10/bottom, then verify the metadata.
Worked for 2 mins 52 sec
Assigned
Terminal Order and Pin Orientation across all terminal pins.Mapping used:
- 1 Top: Power Supply
- 2 Left: Control
- 3 Right: Status
- 4 Left: USB
- 5 Right: UART
- 6 Left: USIM
- 7 Right: ADC / I2C / PCM
- 8 Left: SGMII
- 9 Left/Right: SD Card, Wireless, Antenna, Reserved
- 10 Bottom: Ground
Verified Power Supply is order 1/top and Ground is order 10/bottom.
Fix metadata and audit
Fix voltage description
Add pin-count note
Review symbol metadata
Audit footprint dimensions
