Part Datasheet Audit

A

adrian95

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

flux

I’ll audit the part metadata, locate the official datasheet if needed, then verify the symbol, footprint, and pin descriptions against it and report any mismatches.

flux

Audit complete. DTP13-4P is a TE Connectivity DEUTSCH DTP, 4-position, 2-row, right-angle through-hole header rated up to 25 A, 250 VAC/VDC, and −55 to +125 °C.
  • Critical mismatch: the attached datasheet and footprint are for DTP15-4P, not DTP13-4P.
  • The footprint has the wrong row pitch and mounting-hole spacing for DTP13-4P.
  • The symbol exposes six electrical terminals, but the part has only four contacts; the two mounting holes should be non-electrical.
  • Pin descriptions and pin types are missing; package/case and description properties are also unset.
  • A Datasheet URL was already present, so it was not overwritten. The correct official drawing is TE DTP13-4P Customer Drawing.
Fix mismatches and verify
Correct footprint
Clean symbol pins
Update metadata
Run checks
Sign up to send

Files

Pins

Symbol

Layout

3D View

Name
Pin #
Type
Part Type
Terminal Order
1
1
Unspecified
Terminal
2
2
Unspecified
Terminal
3
3
Unspecified
Terminal
4
4
Unspecified
Terminal
SHIELD
5
Unspecified
Terminal
SHIELD
6
Unspecified
Terminal

DTP13-4P