Part Datasheet Audit
Thought for 9 sec
I’ll audit the part metadata, source the official datasheet if needed, compare the symbol and footprint pin-by-pin, then update the Datasheet property and report any mismatches.
Worked for 8 mins 43 sec
Audit complete. The existing Datasheet URL is an official TE Connectivity catalog, so no property update was required; TE’s DT15-6P product drawing Rev. D was used for the mechanical cross-check.
- Verified: DT15-6P, TE Connectivity DEUTSCH, 6-pin vertical through-hole receptacle, 2×3 contacts, 13 A/contact, 250 VAC/DC, −55 to +125°C. Pad numbering, 9.12 mm column spacing, 4.45 mm row pitch, mounting-hole positions, and nominal body envelope match.
- Mismatches: Signal drills are 1.77 mm versus TE’s recommended 1.88 mm minimum; mounting holes are 2.99 mm versus 3.43 mm minimum.
- Incomplete metadata: All symbol pins are electrically unspecified and lack pin descriptions. Package code, voltage rating, operating temperature, and pitch are also absent from properties.
- The 2.655 mm copper-pad diameter is not prescribed by TE and is therefore a designer-selected value.
- I filed an internal part-quality report covering the undersized holes. No footprint changes were made.
Fix holes and metadata
Fix footprint holes
Add pin descriptions
Populate missing properties
Run part review
