Part Review and Datasheet Verification
Thought for 5 sec
I’ll update the datasheet-backed pin metadata first, then rebuild the footprint as a proper 40-pin 600 mil PDIP and verify the result.
Worked for 1 min 54 sec
Symbol pin metadata is updated; I’m now correcting the footprint scale/geometry to match the 40-pin 600 mil PDIP.
Worked for 5 mins 54 sec
Updated the dsPIC30F4013 part: added datasheet-backed pin descriptions, corrected pin types, added missing alternate-function labels, normalized AVSS, and rebuilt the footprint as a 40-pin 600 mil PDIP with 2.54 mm pitch, 15.24 mm row spacing, 1.6 mm through-hole pads, 0.8 mm drills, and a pin-1 marker.
Open items:
- Flux did not apply the case-only rename from
VsstoVSSon the duplicate ground pins, but their pin type, descriptions, numbers, and footprint pads are corrected.
Suggested next steps:
- Re-run the part review to confirm no remaining symbol/footprint mismatches.
- Publish the corrected component version.
- Optionally switch the Datasheet URL to the official Microchip PDF.
Review, publish, datasheet
Final part review
Publish component
Update datasheet URL
Check ERC DRC
Name
Pin #
Type
Part Type
Pin Description
Terminal Order
MCLR
1
Input
Terminal
Master Clear reset input or programming voltage input; active-low reset.
AN0/VREF+/CN2/RB0
2
Bi-Directional
Terminal
PORTB GPIO RB0; analog input AN0; positive ADC reference VREF+; change notification CN2.
AN1/VREF-/CN3/RB1
3
Bi-Directional
Terminal
PORTB GPIO RB1; analog input AN1; negative ADC reference VREF-; change notification CN3.
AN2/SS1/LVDIN/CN4/RB2
4
Bi-Directional
Terminal
PORTB GPIO RB2; analog input AN2; SPI1 slave select SS1; low-voltage detect input LVDIN; change notification CN4.
AN3/CN5/RB3
5
Bi-Directional
Terminal
PORTB GPIO RB3; analog input AN3; change notification CN5.
AN4/IC7/CN6/RB4
6
Bi-Directional
Terminal
PORTB GPIO RB4; analog input AN4; input capture IC7; change notification CN6.
AN5/IC8/CN7/RB5
7
Bi-Directional
Terminal
PORTB GPIO RB5; analog input AN5; input capture IC8; change notification CN7.
PGC/EMUC/AN6/OCFA/RB6
8
Bi-Directional
Terminal
PORTB GPIO RB6; analog input AN6; ICSP clock PGC; ICD clock EMUC; output compare fault input OCFA.
PGD/EMUD/AN7/RB7
9
Bi-Directional
Terminal
PORTB GPIO RB7; analog input AN7; ICSP data PGD; ICD data EMUD.
AN8/RB8
10
Bi-Directional
Terminal
PORTB GPIO RB8; analog input AN8.
VDD
11
Power In
Terminal
Positive supply for logic and I/O pins.
Vss
12
Ground
Terminal
Ground reference for logic and I/O pins.
OSC1/CLKI
13
Input
Terminal
Oscillator crystal input or external clock source input CLKI.
OSC2/CLKO/RC15
14
Bi-Directional
Terminal
Oscillator crystal output or CLKO; also PORTC GPIO RC15 depending on oscillator mode.
EMUD1/SOSCI/T2CK/U1ATX/CN1/RC13
15
Bi-Directional
Terminal
PORTC GPIO RC13; ICD secondary data EMUD1; secondary oscillator input SOSCI; Timer2 clock T2CK; UART1 alternate TX U1ATX; change notification CN1.
EMUC1/SOSCO/T1CK/U1ARX/CN0/RC14
16
Bi-Directional
Terminal
PORTC GPIO RC14; ICD secondary clock EMUC1; secondary oscillator output SOSCO; Timer1 clock T1CK; UART1 alternate RX U1ARX; change notification CN0.
INT0/RA11
17
Bi-Directional
Terminal
PORTA GPIO RA11; external interrupt input INT0.
IC2/INT2/RD9
18
Bi-Directional
Terminal
PORTD GPIO RD9; input capture IC2; external interrupt input INT2.
DSPIC30F4013-20I/P
