Part Datasheet Audit
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 5 sec
I’ll audit the part metadata, locate the official datasheet if needed, update the Datasheet property, then verify the symbol, footprint, and pin mapping against the source.
Worked for 3 mins 11 sec
Created a project doc
Part Datasheet Audit
Part Datasheet Audit
Scope
Audit of the published part DPF60IM400HB against the official Littelfuse / IXYS datasheet.
Official source
- Manufacturer: Littelfuse / IXYS
- MPN: DPF60IM400HB
- Official datasheet: https://www.littelfuse.com/assetdocs/littelfuse-power-semiconductors-dpf60im400hb-datasheet?assetguid=a5f76738-3996-4aae-b240-70cf40601049
- The Datasheet URL property was already populated, so no update was required.
- Device: HiPerFRED² high-performance fast-recovery single diode
- Package: TO-247 / TO-247AD
- Repetitive reverse voltage, VRRM: 400 V
- Average forward current, IFAV: 60 A at TC = 130°C, rectangular duty cycle d = 0.5
- Surge forward current, IFSM: 600 A, 10 ms sine, TVJ = 45°C, VR = 0 V
Audit complete. The official Littelfuse datasheet URL was already set; MPN and 3-pin mapping are correct, but manufacturer, part type, package, description, and pin descriptions are incomplete. The footprint geometry is not trustworthy for fabrication, so I filed an internal part-quality report.
Full findings: Part Datasheet Audit
Fully repair the part
Complete part metadata
Rebuild TO-247AD footprint
Clean up symbol
Verify manufacturing geometry
