Datasheet Part Audit
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 5 sec
I’ll audit the part metadata, locate and attach the official datasheet if needed, then verify the symbol, footprint, and pin mapping against it and report any discrepancies.
Thought for 3 mins 12 sec
Audit complete. The Datasheet property was already populated, so no update was required; it resolves to Diodes Incorporated datasheet DS36682 Rev. 7.
- Correct: MPN, SO-8 package, 8-pin count, and mapping: pins 1–3 Source, pin 4 Gate, pins 5–8 Drain.
- Key specs: −40 V VDSS, ±25 V VGSS, −10.1 A maximum conditional drain current, 11 mΩ max at VGS = −10 V, 15 mΩ max at −4.5 V, 1.45/1.82 W dissipation, 47.5 nC typical gate charge.
- Flagged: footprint pads are approximately 0.65 × 1.50 mm, while the manufacturer suggests 0.802 × 1.505 mm—pad width is about 0.15 mm narrower.
- Flagged: terminal electrical types are all set to Unspecified, and repeated Source/Drain pins use numbered suffixes rather than shared
SOURCE/DRAINdescriptions. - Flagged: the symbol view did not expose a recognizable P-channel MOSFET graphic/polarity indication, although its terminal numbering is correct.
Fix part library issues
Inspect 3D package
Document key properties
Name
Pin #
Type
Part Type
Pin Orientation
Terminal Order
SOURCE_1
1
Unspecified
Terminal
Left
1
SOURCE_2
2
Unspecified
Terminal
Left
2
SOURCE_3
3
Unspecified
Terminal
Left
3
GATE
4
Unspecified
Terminal
Left
4
DRAIN_1
5
Unspecified
Terminal
Right
DRAIN_2
6
Unspecified
Terminal
Right
DRAIN_3
7
Unspecified
Terminal
Right
DRAIN_4
8
Unspecified
Terminal
Right
DMP4015SSSQ-13
