I’ll inspect the part metadata and geometry, find an official datasheet if needed, update the Datasheet property, then verify symbol/footprint/pins against it.
I found an official Omron datasheet URL in the library metadata and updated this part project to use it; now I’m checking the pin/footprint details against that source.
Reviewed the D2FS-FL-N part information, updated the Datasheet URL to the official Omron PDF, and created the detailed D2FS-FL-N Part Verification Report.
Open items flagged:
Part Type is incorrectly set to Diodes; it should be Switch.
Pin types/descriptions are missing or underspecified.
Dummy terminal must remain unconnected.
Footprint pitch/drill/body dimensions match, but pad numbering orientation should be visually confirmed against Omron CAD/drawing before production.
Suggested next steps:
Fix Part Type and terminal metadata.
Mark COM/NO as passive and DUMMY as do-not-connect/mechanical.
Verify pad numbering against Omron/Ultra Librarian CAD before release.