Part Datasheet Audit

Worked for 1 min 8 sec

Project-level part metadata found in the indexed project data:

Table

Field	Value found
Manufacturer Part Number / MPN	`5V_2.5A_STEP-DOWN_D24V22F5`
Manufacturer	Not found in indexed project properties/components
Designator Prefix	`U`
Package	Not explicitly listed as a property; PCB footprint asset is `MODULE_5V_2.5A_STEP-DOWN_D24V22F5.kicad_mod`
Pin / pad count	6 terminals/pads found
Description	Not found as a project property
Datasheet URL	Not found in indexed project properties
Product URL	Not found in indexed project properties
Part UID	`835bf3e1-33dd-41bb-a166-c0a31607d645`

Terminals / pins defined in the symbol/component data:

Table

Designator	Pin Number	Pin Type	Notes
`VIN`	`VIN`	Input	Symbol position `x=-100, y=29`
`~EN`	`EN`	Input	Symbol position `x=-100, y=0`
`PG`	`PG`	Output	Symbol position `x=100, y=0`
`VOUT`	`VOUT`	Output	Symbol position `x=100, y=29`
`GND`	`GND_1`	Power In	Symbol position `x=100, y=-29`
`GND`	`GND_2`	Power In	Symbol position `x=100, y=-29`

PCB / implementation details found:

Default footprint uses asset: MODULE_5V_2.5A_STEP-DOWN_D24V22F5.kicad_mod
PCB pads present:
- VIN
- VOUT
- ~EN
- PG
- GND
- GND
3D model attached:
- Asset: 5V_2.5A_STEP-DOWN_D24V22F5.step
- Model rotation: 90 0 0

Attached assets found:

Table

Asset	Type	Flags
`MODULE_5V_2.5A_STEP-DOWN_D24V22F5.kicad_mod`	KiCad footprint	`footprint`
`5V_2.5A_STEP-DOWN_D24V22F5.step`	STEP model	`3D model`
`5V_2.5A_STEP-DOWN_D24V22F5 Symbol.svg`	SVG	`thumbnail`, `default`

Gaps / not present in indexed data:

Worked for 7 mins 7 sec

Audit completed and Datasheet URL was set to the official Pololu product page: https://www.pololu.com/product/2858.

Key specs: D24V22F5 synchronous buck module, 5 V output, 5.3–36 V input, 2.2 A typical continuous / 2.5 A application-dependent output, 17.8 × 17.8 × 8 mm, six electrical holes.
Metadata gaps: manufacturer and description are missing; MPN should preferably be normalized to D24V22F5; no dedicated electrical datasheet PDF exists.
Symbol issues: pin names broadly match, but pin descriptions are missing; PG should be described as open-drain, EN as active-low with an onboard pull-up, and the two GND terminals overlap visually.
Critical footprint mismatch: pads are currently interpreted as microscopic SMD pads (~0.00153 mm), while the official drawing specifies 1.02 mm plated through-holes, with five pins at 2.54 mm pitch plus the offset GND connection. The footprint is not manufacturing-ready.

I filed an internal part-quality report for the footprint defect.

Fix metadata and footprint

Fix footprint geometry

Update part metadata

Verify after fixes

Create corrected component

Files

Pins

Symbol

Layout

3D View

D24V22F5