Part Audit Review
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 5 sec
I’ll audit the part metadata and geometry, locate the official TI datasheet if needed, update the Datasheet property, then cross-check symbol pins and footprint against it.
Worked for 3 mins 53 sec
Created a project doc
Part Audit Report
Part Audit Report
Scope
Audit of the CD74HC4067E part metadata, schematic symbol, terminal descriptions/types, and PCB footprint against Texas Instruments documentation.
Authoritative references
- Official TI datasheet: https://www.ti.com/lit/ds/symlink/cd74hc4067.pdf
- TI product page: https://www.ti.com/product/CD74HC4067
The part already had a Datasheet URL populated (
Metadata review
Symbol and pinout cross-check
https://pdf1.alldatasheet.co.kr/datasheet-pdf/view/517534/TI/CD74HC4067E.html), so no Datasheet property update was required by the requested conditional workflow. The official TI URL above is preferable for future maintenance.All 24 terminal numbers and names match the TI top-view pinout:
Symbol metadata mismatchesAudit complete. The MPN, PDIP-24 package, pin count, and full pin mapping match TI’s datasheet; mismatches include unspecified pin types, missing pin descriptions, and potentially undersized/undefined through-hole pad drills requiring footprint verification. The existing third-party datasheet URL was retained because it was already populated; the official TI URL is recorded in the Part Audit Report.
Fix metadata and footprint
Inspect pad dimensions
Correct terminal semantics
Report footprint issue
