BQ34Z100PWR-R2 Review
Thought for 8 sec
I’ll inspect the part metadata, find and attach the official datasheet if needed, then compare symbol pins, footprint, and descriptions against the datasheet.
Worked for 5 mins 22 sec
I found the official TI datasheet and completed the metadata/pin/footprint comparison; I’m recording the detailed findings in a project file now.
Worked for 1 min 45 sec
Created a project doc
BQ34Z100PWR-R2 Part Verification
Date: 2026-07-23 Reviewed available part metadata, symbol terminals, PCB footprint, and pin descriptions for the Flux part project BQ34Z100P...
Completed the BQ34Z100PWR-R2 part review and recorded the detailed findings in BQ34Z100PWR-R2 Part Verification.
Open items:
- Datasheet URL is populated, but it points to an Arrow page rather than the official TI datasheet.
- Part classification says Logic / AND, which mismatches a battery fuel gauge.
- Pin names/numbers match the datasheet, but pin types and descriptions are missing/unspecified.
- Footprint is broadly TSSOP/PW-compatible, with small deviations from TI’s example land pattern.
Suggested next steps:
- Update the part metadata to the official TI datasheet URL.
- Correct the IC classification to battery-management / fuel-gauge.
- Populate datasheet-backed pin types and pin descriptions.
- Optionally tune the footprint to exactly match TI’s PW0014A example land pattern.
Fix metadata issues
Update datasheet URL
Correct part classification
Populate pin metadata
Tune footprint geometry
