Part Metadata Review and Datasheet Update


Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
I’ll inspect the part metadata, find and attach the official datasheet if missing, then compare symbol pins, footprint, and descriptions against the datasheet.
Reviewed the JST BM06B-GHS-TBT part metadata, symbol, footprint, and datasheet. The datasheet URL was already set, so I left it unchanged; no clearly indexed official JST direct PDF was found via web search.
Key flags: symbol pin descriptions are blank, and the footprint signal pads are 0.6 × 1.7 mm while the datasheet extraction indicates 0.6 × 1.35 mm recommended pads. Full findings are in the project document: bm06b-ghs-tbt-part-review.
Fix pins and verify
Update pin descriptions
Verify pad length
Run DRC check
Find official source

Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
1
1
Unspecified
2
2
Unspecified
3
3
Unspecified
4
4
Unspecified
5
5
Unspecified
6
6
Unspecified

BM06B-GHS-TBT