I’ll review the part metadata, find and set an official datasheet URL if missing, then compare symbol/footprint/pins against the datasheet and summarize any mismatches.
Found the actual library match as Murata BLE18PS080SN1D, but this part project’s visible MPN is still set to “IND”; I’m checking the official Murata PDF against the imported symbol/footprint now.
Completed the part review for Murata BLE18PS080SN1D and set the Datasheet URL to the official Murata PDF. I created the full review here: Part Datasheet Review — BLE18PS080SN1D.
Open items flagged:
Pin types are Unspecified; they should be Passive.
Pin descriptions are missing.
Part should be described as a ferrite bead / chip power bead, not just a generic inductor.
Footprint is plausible, but high-current use needs copper-area guidance; the 8 A rating depends on PCB copper, not only the 0603 pads.
Suggested next steps:
Update the two terminal pin types/descriptions.
Add a usage note about Murata’s copper guidance for 8 A designs.
Re-check the 3D model/body alignment against the 1.6 × 0.8 × 0.6 mm package.