Part Datasheet Audit

C

cherepanyadima

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

flux

I’ll audit the part metadata, locate the official manufacturer datasheet if needed, update the Datasheet property, then compare the symbol, footprint, and pin definitions against the source.

flux

I found the part-project terminals; I’m now checking project metadata and the exact pad geometry before comparing them with Panasonic’s RN-series documentation.
Created a project doc

ARN10A12Z Part Datasheet Audit

View Document
Reviewed project metadata, all 15 schematic terminals, the symbol arrangement, the imported KiCad footprint, pad geometry, and the 3D-model ...

flux

Audit complete. The 15-terminal pin map and footprint geometry match Panasonic’s ARN10A12Z datasheet; the existing Datasheet URL was valid, so no update was needed. Main flags are unspecified pin types/descriptions, overly generic RF-relay metadata, and a footprint asset named for the ARN12A12 variant despite compatible geometry.
Full results: ARN10A12Z Part Datasheet Audit
Fix metadata and validate
Fix pin metadata
Improve part properties
Run ERC/DRC
Check footprint naming
Sign up to send

Files

Pins

Symbol

Layout

3D View

COM
Pin Number
3
GND_2
Pin Number
4
GND_1
Pin Number
2
COIL_+
Pin Number
1
Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
COIL_+
1
Unspecified
GND_1
2
Unspecified
COM
3
Unspecified
GND_2
4
Unspecified
COIL_-
5
Unspecified
GND_3
6
Unspecified
N.O.
7
Unspecified
GND_4
8
Unspecified
NOT_CONNECTED_1
9
Unspecified
GND_5
10
Unspecified
GND_6
12
Unspecified
NOT_CONNECTED_2
13
Unspecified
GND_7
14
Unspecified
N.C.
15
Unspecified
GND_8
16
Unspecified

ARN10A12Z