AD9371 Symbol Audit
Thought for 18 sec
I’ll extend the audit into a full symbol-organization pass for AD9371BBCZ: preserve every ball number/name mapping, remove Pin Group, assign datasheet-based sections and orientations, order power first and grounds last, then verify all 196 pins remain unchanged electrically.
Worked for 5 mins 13 sec
The 196-pin symbol has been reorganized. I’m now running a final preservation check on ball mappings, section order, pin types, left/right balance, and footprint pad count.
Thought for 1 min 35 sec
Updated all 196 AD9371BBCZ pins with datasheet-based types, sections, balanced left/right orientations, and unique terminal order; removed Pin Group while preserving every pin name, ball number, symbol position, and footprint mapping. The existing official Analog Devices Rev. B datasheet URL was already correct; key specs are 300 MHz–6 GHz, 8–100 MHz Rx bandwidth, 250 MHz Tx synthesis/ORx bandwidth, JESD204B up to 6.144 Gbps, and a 12 × 12 mm 196-ball 0.8 mm-pitch CSP_BGA.
Open items:
- Package metadata says only
CSPBGA, rather than exact optionBC-196-12. - Individual
Pin Descriptionproperties remain absent, although pin types and organization now match Table 6. - Footprint has 196 pads, but detailed pad diameter/pitch geometry was not exposed for complete dimensional verification.
Fix metadata and verify
Fix package metadata
Add pin descriptions
Verify footprint geometry
Run part review
