Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
I’ll audit the part metadata, locate the official manufacturer datasheet if needed, update the Datasheet property, then verify symbol pins and footprint mapping against it.
The official Abracon ABM8 series datasheet is identified and attached. I’m completing the pin-map and land-pattern comparison and checking the saved property.
Matches: 4-pad 3.2 × 2.5 mm ABM8 footprint; pins 1/3 = crystal, 2/4 = GND; pad geometry matches the recommended land pattern after accounting for 90° rotation.
Key inferred specs: ABM8-25.000MHZ-D4Y-T, 25 MHz fundamental, 18 pF load, ±30 ppm tolerance/stability, −40°C to +85°C, 50 Ω max ESR, 100 µW max drive.
Mismatches/missing data: Project MPN is the placeholder XTAL_1-3_2-4GND, not the inferred ABM8 MPN; Manufacturer Name, Part Type, pin descriptions, and pin electrical types are unset. The symbol’s logical pin mapping is correct.