Binder Part Audit

C

cherepanyadima

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

flux

I’ll audit the part metadata, locate the official Binder datasheet if needed, update the Datasheet property, then verify the symbol, footprint, and pin descriptions against the manufacturer documentation.

flux

Audit complete. The existing Datasheet URL already points to an official Binder PDF, so it was retained; I added missing descriptions for contacts 1–8 and the shield terminal.
  • Confirmed: M12-A Series 763, female panel connector, 8 contacts + shield, THR, IP68, UL 2238, 30 V, 2 A (UL 1.5 A), −40 to +85 °C.
  • Footprint: correct 9 electrical pads, four mechanical holes, and pin-1 marking.
  • Flagged: missing Manufacturer Name, noncanonical MPN Binder_99-3482-601-08, conflicting front/rear mounting descriptions, and 3D model filename 99-3481-601-08.stp potentially referencing another variant.
  • Footprint dimensions could not be fully certified because Binder’s detailed drawing link was not directly accessible.
Correct part metadata
Verify 3D model
Resolve mounting conflict
Validate footprint geometry
Sign up to send

Files

Pins

Symbol

Layout

3D View

Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
Pin Description
1
1
Passive
Contact 1
2
2
Passive
Contact 2
3
3
Passive
Contact 3
4
4
Passive
Contact 4
5
5
Passive
Contact 5
6
6
Passive
Contact 6
7
7
Passive
Contact 7
8
8
Passive
Contact 8
SHIELD
SH
Passive
Shielding plate connection

99-3482-601-08