Part Review Check
Worked for 2 mins 29 sec
The part already has a datasheet URL set, so I’m using that for extraction; I’m also checking public/library references to validate whether it matches the official E-Switch documentation.
Worked for 9 mins 20 sec
Created a project doc
Part Review - 800SP9B6M2RE
Date: 2026-07-22 Reviewed available part information for the published Flux part project 800SP9B6M2RE, including project metadata, schematic...
Completed the part review and wrote the detailed findings to Part Review - 800SP9B6M2RE.
Open items:
- Datasheet URL was already set, so I did not overwrite it.
- Main flag: verify/explicitly set the footprint drill size to Ø1.09 mm.
- Minor cleanup: set pins to Passive, add pin descriptions, and set Part Type to Switch if editable.
Suggested next steps:
- Update the footprint drill/hole size if it is not explicitly Ø1.09 mm.
- Clean up pin metadata for terminals 1 and 3.
- Re-run a footprint/manufacturing check after metadata/footprint cleanup.
Fix metadata and footprint
Set drill size
Clean pin metadata
Set Part Type
Run checks
Refine this doc
Ask about this doc
Part Review - 800SP9B6M2RE
Date: 2026-07-22
Scope
Reviewed available part information for the published Flux part project
800SP9B6M2RE, including project metadata, schematic terminals, footprint geometry visible through layout inspection, library metadata, and the datasheet currently attached to the project.Available Part Information
Table
| Field | Current project / library value | Review |
|---|---|---|
| Manufacturer Part Number | 800SP9B6M2RE | Matches datasheet |
| Manufacturer | E-Switch | Matches datasheet |
| Description | PUSHBUTTON, 0.4VA, 20VAC/VDC SPST, Off-(On) Through Hole | Matches datasheet core function/rating |
| Mount | Through Hole | Matches P.C. mounting in datasheet |
| Designator Prefix | S | Appropriate for switch |
| Terminal / pad count | 2 | Matches datasheet terminals 1 and 3 |
| Datasheet URL | Already set in the part project | No missing-datasheet update was required |
| Flux library indexed URL | https://configured-product-images.s3.amazonaws.com/2D/specs/800SP9B6M2RE.pdf | Public/library indexed E-Switch drawing/spec PDF also found |
Datasheet Source Checked
The project already had a Datasheet URL set, so no missing-datasheet update was required. The attached PDF and the public/library indexed E-Switch drawing agree on the reviewed values.
Document identity extracted from the datasheet:
- Manufacturer/document owner: E-Switch
- Part/title: 800SP9B6M2RE
- Drawing/object ID: T811020 / 000025860
- Revision: H
- Original date: 2011-06-08
- Latest noted print update: 2024-12-30
Key Datasheet Specs
Table
| Spec | Datasheet value |
|---|---|
| Circuit | SPST |
| Switch function | OFF-(ON), momentary ON |
| Contact state | Position 1: open; Position 2: terminals 1-3 connected |
| Electrical rating | 0.4 VA @ 20 V AC or DC max |
| Contact resistance | 20 mΩ max initial @ 2-4 VDC, 100 mA |
| Insulation resistance | 1,000 MΩ min |
| Electric strength | 1,000 V RMS at sea level |
| Operating temperature | -40°C to +85°C |
| Electrical life | 6,000 make-and-break cycles |
| Mechanical life | 50,000 make-and-break cycles |
| Contacts/terminals | Gold plated |
| Mounting | P.C. mounting / through-hole |
| Terminal numbers | 1 and 3; terminal numbers for reference only |
| Terminal pitch | 5.08 mm [0.200 in] |
| Terminal/drill hole | Ø1.09 mm [Ø0.043 in] |
| Noted outline dimensions | 8.13 mm, 8.64 mm, 5.59 mm, 3.94 mm, 4.39 mm, 3.30 mm, 2.54 mm, 6.10 mm |
| Tolerance note | X.X ±0.4 mm, X.XX ±0.25 mm |
Schematic Symbol Cross-Check
Observed schematic representation:
- Two terminal components:
1and3 - Each terminal has the corresponding Pin Number property: 1 and 3
- Pin Type is currently
Unspecified - No explicit Pin Description properties are present
- No nets are present in the part project, which is normal for a standalone part definition
Assessment:
Table
| Item | Expected from datasheet | Observed in part | Result |
|---|---|---|---|
| Terminal count | 2 electrical terminals | 2 terminals | Pass |
| Terminal numbering | 1 and 3 | 1 and 3 | Pass |
| Electrical behavior | Passive SPST contact, open normally and shorted when pressed | Represented as two terminals | Pass |
| Pin descriptions | Terminal 1 / terminal 3, connected when pressed | Missing | Minor improvement recommended |
| Pin type | Passive switch contacts | Unspecified | Minor semantic mismatch; functional risk low |
Recommended symbol cleanup, if desired:
- Set terminal 1 Pin Type to
Passiveand Pin Description toSwitch contact terminal 1; connected to terminal 3 when pressed. - Set terminal 3 Pin Type to
Passiveand Pin Description toSwitch contact terminal 3; connected to terminal 1 when pressed.
Footprint Cross-Check
Observed footprint/layout representation:
- Two pads:
1and3 - Pads are circular and forced annular on top/bottom, consistent with through-hole style
- Pad positions appear to be separated by 5.08 mm after interpreting the layout return's internal unit scaling (
0to0.00508, likely meters internally) - Pad size appears to be 1.635 mm after interpreting internal scaling (
0.001635) - Silkscreen rectangle width is 8.13 mm in the flat SVG, matching a datasheet outline dimension
- The inspected layout data did not expose an explicit
holeSize/ drill diameter for the pads
Assessment:
Table
| Item | Expected from datasheet | Observed in part | Result |
|---|---|---|---|
| Pad count | 2 plated through holes | 2 pads | Pass |
| Pad numbering | 1 and 3 | 1 and 3 | Pass |
| Terminal pitch | 5.08 mm | Appears to be 5.08 mm | Pass, assuming internal unit scaling |
| Body/silkscreen width | 8.13 mm | 8.13 mm | Pass |
| Drill/hole size | Ø1.09 mm | Not explicitly visible in inspected rules | Flag for verification |
| Pad outside diameter | Not explicitly specified by datasheet | Appears ~1.635 mm | Likely acceptable if drill is Ø1.09 mm |
If the pad outside diameter is 1.635 mm and drill is Ø1.09 mm, the annular ring would be about 0.2725 mm, which is reasonable. The manufacturing-critical item is confirming that the actual plated through-hole drill is Ø1.09 mm.
Mismatches / Risks Flagged
-
Footprint drill diameter not visible in inspected data
- Datasheet requires/indicates Ø1.09 mm terminal holes.
- The footprint pads look like through-hole annular pads, but the inspected data did not expose a
holeSizevalue. - Recommendation: verify or explicitly set the pad drill/hole size to Ø1.09 mm before relying on manufacturing outputs.
-
Pin Type is
Unspecifiedinstead ofPassive- Low functional risk for a two-terminal mechanical switch.
- Recommendation: update both terminal pin types to
Passivefor cleaner ERC semantics.
-
Pin Description properties are missing
- Low functional risk because the part is a simple SPST contact and terminal numbers are present.
- Recommendation: add brief descriptions for terminal 1 and terminal 3 to document the OFF-(ON) behavior.
-
Part Type property in library search appears blank
- Project metadata and description clearly identify the part as a switch, but the library search result showed
Part Typeas an empty value. - Recommendation: set Part Type to
Switchif this property is editable for the published part.
- Project metadata and description clearly identify the part as a switch, but the library search result showed
Overall Result
The part identity, manufacturer, terminal count, SPST OFF-(ON) behavior, electrical rating, through-hole mounting, pad numbering, apparent pad pitch, and silkscreen/body width are consistent with the E-Switch datasheet. The main item to verify before fabrication use is the explicit through-hole drill size of Ø1.09 mm; pin type/descriptions and Part Type are metadata cleanup recommendations rather than hard functional failures.
Scope
Available Part Information
Datasheet Source Checked
Key Datasheet Specs
Schematic Symbol Cross-Check
Footprint Cross-Check
Mismatches / Risks Flagged
Overall Result
