Part Datasheet Review and Verification
Worked for 40 sec
I found this is a published part project with two terminals and no orderable part number beyond the WE-HCF 2013 family/package code; I added the official Würth WE-HCF catalog URL as the Datasheet URL and am checking geometry/pins now.
Worked for 5 mins 2 sec
Review complete. I added the official Würth Elektronik WE-HCF catalog URL to the part’s Datasheet URL property and cross-checked the part against the official WE-HCF 2013 datasheet data.
Key findings:
- Part is a Würth WE-HCF SMT High Current Inductor, size 2013, nominal package 20.8 × 20.5 × 13.5 mm.
- Symbol has 2 electrical terminals, matching the datasheet schematic pins 1–2.
- Footprint has 3 pads: pads 1–2 electrical, pad 3 mechanical/stability only — this matches the datasheet note.
- Main mismatch/cleanup item: schematic terminal pin descriptions are currently undefined; pin 3 exists only in footprint, not symbol, which is acceptable mechanically but should be documented as “stability/mechanical pad only.”
- MPN is still a family/package identifier (WE-HCF_2013), not an exact orderable Würth code like 7443630700, so electrical specs vary by selected order code.
Fix metadata and review
Fix pin descriptions
Set exact MPN
Check footprint dimensions
Run ERC DRC
