Würth USB Footprint Check

Qualify/repair THIS source Würth 61400826021 dual USB-A footprint exact drawing attached. Build sourced dimension/datum table before edits: all pads holes shell stakes face/board-edge datum height insertion direction tolerances. Preserve schematic mapping. Compare actual geometry and fix proven defects, read back pad count pitch holes layer orientation. Source edits only active project no general placement/routing. Publish repaired new version if edited; report version identifier exact evidence and qualified versus hard blockers. If no edit access supply project-local override recipe.

Thought for 15 sec

flux

I’ll qualify the attached Würth drawing against the active source part, build the datum-controlled dimension table first, then compare every pad and stake. Because this project is view-only, I’ll make no unsupported edits; if defects are proven, I’ll provide an exact project-local override recipe and file a source-part quality report.

Worked for 6 mins 53 sec

flux

Qualified source version #452bffd4. No proven 2D defect was found: all 12 pads, drill sizes, coordinates, pitches, through-hole layers, orientation, and pins 1–8/S1–S4 match the Würth drawing, so no repaired version was necessary or published.

Qualified: complete 2D footprint and preserved schematic mapping.
Hard blockers: manufacturer-unspecified copper land diameters and non-measurable STEP height/seating/mating datum.
Access: view-only; the report includes an exact project-local override recipe if a downstream instance has drifted.

Download the complete qualification and evidence report

Files

Pins

Symbol

Layout

3D View

61400826021