Part Audit Review
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 9 sec
I’ll audit the part metadata, locate the official Molex documentation if needed, update the Datasheet property, then verify the symbol, footprint, and pin descriptions against the manufacturer drawing.
Worked for 8 mins 24 sec
Created a project doc
Part Audit Report
Part Audit Report
Part identification
- Manufacturer: Molex
- MPN in project: 0522711579
- Manufacturer catalog number: 52271-1579 / 522711579
- Product: Easy-On FFC/FPC Connector, Slider Series
- Configuration: 1.00 mm pitch, right-angle, bottom-contact, ZIF, SMT, 15 circuits, 3.00 mm mated height
- Plating: Tin-bismuth on mating and termination surfaces
- Official product page / current Datasheet URL: https://www.molex.com/en-us/products/part-detail/522711579?display=pdf
- Official sales drawing: https://www.molex.com/pdm_docs/sd/522711579_sd.pdf
The Datasheet URL property was already populated, so no property update was required.
Key specifications
Family documentation additionally states 20 mΩ maximum contact resistance, 100 MΩ minimum in...
Audit complete. The official Molex Datasheet URL was already set; identity and core specs match, but the computed footprint appears 1000× undersized, and all pin descriptions/types are incomplete—especially mechanical hold-down pads 16–17. I filed a part-quality report; full findings are in Part Audit Report.
Fix metadata and footprint
Fix pin metadata
Correct footprint scaling
Add connector properties
Run validation review
