Part Audit Review


Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
I’ll audit the part metadata, locate the official manufacturer documentation if needed, then cross-check the symbol, footprint, and terminal descriptions and correct only the Datasheet property if it is missing.
Created a project doc

Part Audit Report

View Document

Part Audit Report Scope
Audit of Molex 504050-0291 metadata, official documentation, schematic symbol, terminal descriptions, and PCB footprint.
Official sources Identity and key specifications
  • Manufacturer: Molex
  • MPN: 504050-0291 / numeric ordering number 5040500291
  • Series/function: Pico-Lock 1.5 wire-to-board PCB header
  • Configuration: male, single row, 2 circuits, right-angle, surface mount, positive...
Audit complete. The official Molex datasheet URL was already set, so no update was required; the footprint dimensions match the recommended 1.50 mm-pitch land pattern.
Key mismatches: the canonical Part Type appears blank, terminal descriptions/types are missing, and pads 3–4 are mechanical hold-down nails but are represented as ordinary electrical pins. Full specifications and findings are in Part Audit Report.
Fix metadata issues
Mark nails mechanical
Improve symbol labeling
Run part review

3
Pin Number
3
1
Pin Number
1
4
Pin Number
4
2
Pin Number
2
Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
1
1
Unspecified
Left
2
2
Unspecified
Left
3
3
Unspecified
Left
4
4
Unspecified
Left

504050-0291