Audit complete. The existing Datasheet property was already populated, so no update was needed; official TE documentation confirms the 22 terminals/pads, LED polarity, integrated magnetics, shield tabs, boardlocks, hole pattern, pitch, and orientation.
Key mismatches
Part Type = Optoelectronic Devices is inaccurate; this is a shielded 1×1 RJ45 jack with integrated Gigabit/PoE magnetics.- All symbol pins have unspecified electrical types and lack functional descriptions.
MH1/MH2 are conductive shield-ground tabs, not ordinary mechanical holes.- Mount and description properties are underspecified.
- Exact STEP-model dimensions/alignment could not be numerically verified, though no obvious scaling or orientation issue was found.
Key ratings include 1 Gb/s, 720 mA at 57 VDC PoE, 2250 VDC isolation, 350 µH minimum primary inductance, and −40 °C to +85 °C operation. No critical footprint or pin-mapping errors were found.