Part Audit Review
Thought for 9 sec
I’ll audit the part metadata, locate the official manufacturer datasheet if needed, update the Datasheet property, then verify the symbol, footprint, and pin descriptions against it.
Worked for 46 sec
I’m reading the current metadata and exact pad/symbol definitions first, then I’ll compare them to the manufacturer drawing.
Worked for 5 mins 28 sec
Created a project doc
Part Audit Report — Würth Elektronik 434123043816
| Field | Current part data | Datasheet result | |---|---|---|
Audit complete. The MPN, 2-pin count, WS-TASV variant, ratings, and footprint land pattern match the official Würth datasheet; the existing Datasheet URL was valid, so no update was required.
Main issues: the schematic symbol is malformed/non-standard, both pins have unspecified electrical types and no descriptions, and the package/case property is missing. Full findings: Part Audit Report.
Fix metadata and symbol
Fix symbol issues
Update pin metadata
Add package metadata
Run part review
Refine this doc
Ask about this doc
Part Audit Report — Würth Elektronik 434123043816
Identification and metadata
Table
| Field | Current part data | Datasheet result |
|---|---|---|
| Manufacturer part number | 434123043816 | Correct |
| Manufacturer | Würth | Correct manufacturer; official full name is Würth Elektronik eiSos GmbH & Co. KG |
| Series / description | WS-TASV J-Bend SMT tactile switch, 6.0 × 3.5 mm, 4.3 mm height, black actuator, 160 gf | Correct |
| Mount | Surface Mount | Correct |
| Pin count | 2 | Correct |
| Part type | Electromechanical Components | Acceptable but broad |
| Package / case property | Not explicitly set | Missing metadata; should identify the 6.0 × 3.5 mm J-Bend SMT package |
| Datasheet URL | A PDF is already attached via a stored upload URL | Present and readable; no update was required by the request. Official direct URL: https://www.we-online.com/components/products/datasheet/434123043816.pdf |
| Designator prefix | S | Correct for a switch |
Key official specifications
- Top-actuated SPST normally-open tactile switch
- Body: 6.0 × 3.5 mm
- Height: 4.3 mm
- Surface-mount J-Bend terminals; tape-and-reel packaging
- Rated current: 50 mA
- Rated voltage: 12 VDC
- Initial contact resistance: 100 mΩ maximum
- Contact resistance after life test: 1 Ω maximum
- Insulation resistance: 100 MΩ minimum at 500 VDC
- Withstanding voltage: 250 VAC for 1 minute
- Contact bounce: 10 ms maximum
- Operating force: 160 gf ± 50 gf
- Stroke: 0.25 mm ± 0.1 mm
- Electrical life: 50,000 cycles at 50 mA / 12 VDC
- Operating temperature: −40°C to +85°C
- MSL 1; not washable
- Actuator and frame: black LCP, UL94 V-0
- Silver-plated contacts and terminals
- RoHS compliant, REACH conform/declared, halogen-free
Schematic symbol review
Correct
- Two terminals are present and numbered 1 and 2.
- Terminal names
COMandNOdescribe the normally-open function logically.
Mismatches / quality issues
- The rendered symbol does not depict a tactile switch or SPST-NO contact. It renders as a large blank rectangle with placeholder-style text, so the electrical function is not visually recognizable.
- Both terminals are placed on the same side of the symbol rather than on opposite sides of a conventional switch contact graphic.
- Both terminal
Pin Typevalues areUnspecified; they should normally bePassivefor a mechanical switch. Pin Descriptionis missing for both pins. Suggested descriptions: pin 1 — “Switch contact terminal 1”; pin 2 — “Switch contact terminal 2”. The datasheet only numbers the contacts 1 and 2 and does not assign a polarized COM/NO direction; either terminal can serve as either side of the contact.- Because the device is a non-polarized two-terminal normally-open contact, labeling one physical terminal
COMand the otherNOis electrically usable but more specific than the manufacturer’s documentation. Neutral names such as1/2orA/Bwould match the datasheet more literally.
Footprint review
Correct
The imported footprint matches the recommended land pattern:
- Two rectangular SMD pads
- Pad source dimensions: 1.5 × 2.0 mm, rotated 90°
- Pad centers: x = −2.7 mm and +2.7 mm
- Effective overall copper span: 7.4 mm
- Effective inner pad gap: 3.4 mm
- Effective pad transverse dimension: 1.5 mm
- Fabrication body outline: 6.0 × 3.5 mm
- Pin/pad mapping is 1-to-1: terminal 1 → pad 1; terminal 2 → pad 2
These values agree with the official Würth recommended land pattern dimensions of 7.4 mm overall, 3.4 mm inner gap, and 1.5 mm pad width.
Footprint observations
- No dimensional or pad-mapping mismatch was found.
- The courtyard is asymmetrical around the body. This does not alter solderability, but it is unusual and should be visually reviewed if courtyard-based placement clearance is important.
- The footprint includes a pin-1 marker, although this switch is electrically non-polarized. The marker is harmless but not functionally necessary.
Overall verdict
The MPN, manufacturer, physical variant, pin count, description, key ratings, and PCB land pattern are consistent with the official datasheet. The footprint appears manufacturable and dimensionally correct. The main defect is the schematic symbol presentation and terminal metadata: the symbol graphic is malformed/non-standard, pin types are unspecified, and pin descriptions are absent. The package/case metadata is also missing.
Identification and metadata
Key official specifications
Schematic symbol review
Correct
Mismatches / quality issues
Footprint review
Correct
Footprint observations
Overall verdict
