Part Audit Review
Thought for 50 sec
The build report shows all requested corrections landed using TE drawing C-1827231 Rev. F4. I’m now running an independent read-back review of the 440-pin mapping, unbound hold-downs, and NPTH geometry.
Thought for 2 mins 56 sec
4/4 Independently verify symbol-to-pad mapping and mechanical geometry
Source the exact TE customer drawing and mounting-feature dimensions
Remove mechanical terminals 441–444 and leave a 440-pin symbol
Correct mounting/locating-hole definitions in the footprint
Independently verify symbol-to-pad mapping and mechanical geometry
Thought for 11 sec
Created a thread
TE 1827231 Verification
Completed
View Thread
Thought for 6 sec
Awaiting 1 background task
Received notification from "TE 1827231 Verification" that it finished — picking the work back up.
Thought for 34 sec
Corrections completed and independently verified against TE customer drawing C-1827231 Rev. F4:
- Symbol now has exactly 440 passive terminals, numbered 1–440.
- Four hold-down lands remain physically present but are electrically unmapped.
- Four locating holes are correctly defined as NPTH: left pair Ø0.90 mm, right pair Ø1.60 mm.
- All 440 contact pads retain correct one-to-one terminal mapping.
- No remaining discrepancies were found.
Update part metadata
Review footprint manufacturing
Add 3D package model
Prepare release checks
