WSEN PDUS Audit

Worked for 2 mins 50 sec

flux

Audit result

Scope status: Completed. No symbol or footprint geometry was altered.

Official source

Official Würth Elektronik datasheet:
https://www.we-online.com/components/products/datasheet/2513130810102.pdf
Datasheet identification: WSEN-PDUS, order code 2513130810102, revision 001.000, dated 2023-05-05, status Valid.
The ordering code exactly matches the current part and identifies the ±1 kPa / ±10 mbar horizontal-barbed variant.

Datasheet property

No update performed. The existing Datasheet URL property was already populated:

https://storage.googleapis.com/graviton-electric-symbols/document_assets/user-uploaded/0d4235485616d1320a8ab9040c6cb4dece387855dd801f2486b800c9a42143c7.pdf

Inspection of that document returned the exact order code 2513130810102 and official Würth content. The instruction only requested an in-place update when the property was absent or blank, so the existing value was preserved. The official manufacturer URL is provided above.

Metadata audit

Table

Field	Actual	Datasheet/reference	Result
MPN	2513130810102	2513130810102	Match
Manufacturer	“Würth”	Würth Elektronik eiSos GmbH & Co. KG	Minor/incomplete
Part type	Sensors	Differential pressure sensor	Acceptable, generic
Pin count	8	8 pads	Match
Description	WSEN-PDUS ±1.0 kPa, I²C and analog, horizontal barbed ports	Same variant	Match
Package/case property	Absent	Custom WSEN-PDUS pressure-sensor package	Missing
Project datasheet URL	Populated with uploaded official PDF	Official manufacturer PDF available	Valid content; noncanonical host

Key specifications

Differential-pressure range: −1 to +1 kPa (±10 mbar)
Supply: 3.0–3.6 V, 3.3 V typical
Current consumption: 4 mA typical, 6.5 mA maximum
Interfaces: I²C and analog
Pressure resolution: 15-bit ADC
Analog output resolution: 11-bit DAC
Typical total accuracy, 0–70 °C: ±0.75% FSS
Typical absolute accuracy at 25 °C: ±0.5% FSS
Response time: 2.2 ms
Analog sensitivity: 0.757 kPa/V
Digital sensitivity: 7.63×10⁻⁵ kPa/digit
Operating temperature: −25 to +85 °C
Compensated range: 0 to 70 °C
Common-mode pressure maximum: 2.5 MPa
Differential overpressure/burst rating: 10 kPa
ESD HBM: 2 kV
MSL: 1
Mechanical drawing: 13.31 ±0.2 mm principal body dimension; drawing also specifies 12.01 mm, 8.0 mm body width, Ø2.2/Ø2.7 mm port features and 6.5° port geometry. The commonly quoted 13.3 × 11.6 mm description is not a complete substitute for the dimensioned drawing.

Individual pin verification

Table

Pad	Actual symbol label	Expected function	Actual properties	Assessment
1	SCL	I²C serial clock, Input	Pin Type=Unspecified; no description/group	Number/function correct
2	SDA	I²C serial data, Input/Output	Unspecified; no description/group	Number/function correct
3	GND	Negative supply, Supply/Ground	Unspecified; no description/group	Number/function correct
4	VOUT	Analog output, Output	Unspecified; no description/group	Number/function correct
5	VDD	Positive supply, Supply/Power In	Unspecified; no description/group	Number/function correct
6	NC	No Connection	Unspecified; no description/group	Correctly distinguished as NC
7	RSVD_1	Reserved	Unspecified; no description/group	Functionally reserved; label differs
8	RSVD_2	Reserved	Unspecified; no description/group	Functionally reserved; label differs

Pins 6–8 are not functional I/O: pin 6 is NC; pins 7 and 8 are reserved.

Symbol audit

Custom symbol body: rectangle 219 × 119 symbol units
Pins are arranged logically:
- Left: SCL, SDA, GND, VOUT
- Right: RSVD_2, RSVD_1, NC, VDD
All eight pin numbers appear and match the footprint.
Symbol labels include both number and name.
Symbol contains a visible “MAIN” label.
All terminals lack electrical types, descriptions, groups, sections, orientations and terminal-order metadata.
No datasheet-defined symbol outline exists, so body dimensions are stylistic rather than mechanically verifiable.

Footprint audit Pads

All eight pads match the official recommended land pattern:

SMD rectangular pads
Copper/paste/mask on the top side in the source footprint
Nominal pad dimensions: 1.0 × 2.1 mm, rotated 90°, giving a physical land extent of 2.1 mm horizontally and 1.0 mm vertically
No drilled holes

Pad centers in millimetres:

Table

Pad	X	Y
1	−5.630	−2.285
2	−5.630	−0.760
3	−5.630	+0.760
4	−5.630	+2.285
5	+5.630	+2.285
6	+5.630	+0.760
7	+5.630	−0.760
8	+5.630	−2.285

These implement the datasheet’s 1.52 mm pitch, 1.0 × 2.1 mm lands, 9.16 mm inner-row separation, and 4.57 mm row span within normal rounding.

Outline/courtyard

Fabrication body outline: 13.31 × 8.0 mm
Port graphics extend to approximately Y=7.6 mm
Imported courtyard rectangle: X ±7.68 mm, Y −5.0 to +8.6 mm
Pin-1 marker exists near pad 1.
A STEP model and imported KiCad footprint are present.

Mismatches and severity

High — Datasheet keepout missing
The official recommended land pattern requires a central area with “no metal, open traces or vias.” No actual copper/routing keepout node or rule was found.
High — Courtyard geometry appears mapped into the silkscreen asset
The source footprint defines the ±7.68 mm courtyard on F.CrtYd, but the rendered Flux Silk Shapes asset contains that rectangle and no separate courtyard-layer node was found. This can print an unintended large silkscreen box while failing to provide a usable courtyard.
Medium — All terminal electrical types are Unspecified
Expected: SCL Input; SDA bidirectional; GND Ground/Power; VOUT Output; VDD Power In; pin 6 Not Connected; pins 7–8 Reserved.
Medium — Pin descriptions and groups are absent
None of the eight pins has the datasheet description. I²C grouping for SCL/SDA and power grouping for VDD/GND are also absent.
Medium — Reserved labels are noncanonical
Actual labels are RSVD_1 and RSVD_2; the datasheet labels both pins simply RSVD. Pin numbers remain correct, so there is no electrical swap.
Medium — Package/case metadata missing
No Package or Case Code property documents the custom WSEN-PDUS horizontal-barbed package.
Medium — Footprint text import is questionable
Reference/value text occupy the same position, and Flux reports 1.27 mm stroke width as well as 1.27 mm font size. This is likely an import mapping error and may make text unusable or overlapping.
Low — Manufacturer name abbreviated
Actual: “Würth.” Expected canonical manufacturer: “Würth Elektronik eiSos GmbH & Co. KG.”
Low — Generic symbol annotation
The visible “MAIN” label is not a datasheet-defined device label and adds little identification value.

No pad-number, pad-position, pad-size, pinout, MPN, pressure-range, interface, or port-orientation mismatch was found.

Worked for 1 min 8 sec

Created a project doc

Part Audit — WSEN-PDUS 2513130810102

View Document

Manufacturer: Würth Elektronik eiSos GmbH & Co. KG Family: WSEN-PDUS differential pressure sensor

flux

Audit complete. The MPN, variant, 8-pin mapping, and pad geometry match the official Würth datasheet; the existing Datasheet property already contains the official document, so it was left unchanged.

Key issues: missing central copper/via keepout, courtyard incorrectly included in silkscreen, unspecified pin electrical types/descriptions, and missing package metadata. Full results: Part Audit — WSEN-PDUS 2513130810102.

Fix audit issues

Add keepout

Correct pin metadata

Clean footprint layers

Use canonical datasheet

Files

Pins

Symbol

Layout

3D View

RSVD_2

Pin Number

SDA

Pin Number

GND

Pin Number

VDD

Pin Number

SCL

Pin Number

VOUT

Pin Number

RSVD_1

Pin Number

Part Audit — WSEN-PDUS 2513130810102

Official source

Manufacturer: Würth Elektronik eiSos GmbH & Co. KG
Family: WSEN-PDUS differential pressure sensor
Exact order code / MPN: 2513130810102
Official datasheet: https://www.we-online.com/components/products/datasheet/2513130810102.pdf
Datasheet revision: 001.000, 2023-05-05, status Valid
Variant: ±1 kPa (±10 mbar), horizontal barbed ports, I²C and analog outputs

Datasheet property result

The part already has a populated Datasheet URL property:

https://storage.googleapis.com/graviton-electric-symbols/document_assets/user-uploaded/0d4235485616d1320a8ab9040c6cb4dece387855dd801f2486b800c9a42143c7.pdf

That file contains the official Würth datasheet and exact MPN, so it was not overwritten because the requested update was conditional on the property being absent. The manufacturer-hosted canonical URL is listed above.

Metadata cross-check

Table

Field	Part data	Datasheet	Result
MPN	2513130810102	2513130810102	Match
Manufacturer	Würth	Würth Elektronik eiSos GmbH & Co. KG	Minor: abbreviated
Pin/pad count	8	8	Match
Description	±1.0 kPa, I²C + analog, horizontal barbed ports	Same exact variant	Match
Package/case	Not set	Custom WSEN-PDUS horizontal-port package	Missing metadata
Datasheet URL	Uploaded official PDF	Official manufacturer PDF available	Valid, noncanonical host

Key specifications

Differential pressure range: −1 to +1 kPa (±10 mbar)
Supply voltage: 3.0–3.6 V; 3.3 V typical
Current consumption: 4 mA typical; 6.5 mA maximum
Interfaces: I²C and analog voltage output
Pressure conversion: 15-bit ADC
Analog output: 11-bit DAC
Typical total accuracy over 0–70 °C: ±0.75% FSS
Typical absolute accuracy at 25 °C: ±0.5% FSS
Response time: 2.2 ms
Analog sensitivity: 0.757 kPa/V
Digital sensitivity: 7.63 × 10⁻⁵ kPa/digit
Operating temperature: −25 to +85 °C
Compensated temperature range: 0 to 70 °C
Maximum common-mode pressure: 2.5 MPa
Differential overpressure / burst rating: 10 kPa
ESD rating: 2 kV HBM
Moisture sensitivity level: MSL 1
Body drawing includes 13.31 ±0.2 mm principal length and 8.0 mm body width; port features extend beyond the body. Use the full dimensioned drawing rather than the simplified 13.3 × 11.6 mm catalog description for enclosure design.

Pin-by-pin cross-check

Table

Pin	Current label	Datasheet function	Expected electrical type	Result
1	SCL	I²C serial clock	Input	Function/number match; type and description missing
2	SDA	I²C serial data	Bidirectional	Function/number match; type and description missing
3	GND	Negative supply	Ground / power	Function/number match; type and description missing
4	VOUT	Analog output	Output	Function/number match; type and description missing
5	VDD	Positive supply	Power input	Function/number match; type and description missing
6	NC	No connection	No-connect	Match; type and description missing
7	RSVD_1	Reserved	Reserved/passive	Number/function match; noncanonical label and metadata missing
8	RSVD_2	Reserved	Reserved/passive	Number/function match; noncanonical label and metadata missing

Pins 6–8 are not functional I/O: pin 6 is NC, while pins 7 and 8 are reserved.

Schematic symbol findings

All eight pin numbers and functional labels are present and map to the correct footprint pads.
Pin arrangement is logical and readable.
Every terminal currently has Pin Type: Unspecified.
Pin Description, Pin Group, Section, Pin Orientation, and Terminal Order metadata are absent.
Pins 7 and 8 are labeled RSVD_1 and RSVD_2; the datasheet calls both RSVD.
The visible MAIN annotation is generic and not a datasheet-defined device label.

Footprint cross-check

The eight copper lands match the recommended pattern:

SMD rectangular lands, top copper/paste/mask
Nominal land size: 1.0 × 2.1 mm
Vertical pitch: approximately 1.52 mm
Pad-row center X positions: ±5.63 mm
Pad Y positions: ±2.285 mm and ±0.760 mm
No drilled pad holes
Pin-1 marker present
STEP model and KiCad footprint asset present

Footprint mismatches / risks

High — Required central routing keepout is missing. The datasheet land pattern marks a central zone where metal, open traces, and vias are prohibited. No enforceable keepout rule/node was found.
High — Courtyard imported into active silkscreen geometry. The KiCad source has a ±7.68 mm by −5.0/+8.6 mm F.CrtYd rectangle, but the Flux Silk Shapes asset includes that rectangle and no separate courtyard node was found. This risks printing an unintended large box and leaves no functional courtyard.
Medium — Pin electrical types and descriptions are absent. This weakens ERC behavior and library usability.
Medium — Package/case metadata is absent. The custom horizontal-port package is not documented in properties.
Medium — Reserved-pin labels are noncanonical. RSVD_1/RSVD_2 are understandable but differ from the datasheet’s RSVD naming.
Medium — Footprint text import is questionable. Reference/value text share source coordinates, and text rules show a 1.27 mm stroke width as well as 1.27 mm font size, suggesting an import mapping issue.
Low — Manufacturer name is abbreviated. Use the full canonical manufacturer name for clean BOM metadata.

Overall assessment

The MPN, variant description, eight-pin mapping, pad numbers, land dimensions, and pad positions match the official datasheet. The most important corrections are adding the datasheet-required center keepout and separating the courtyard from silkscreen. Symbol terminal metadata should also be completed before publishing the part for broad reuse.

Official source
Datasheet property result
Metadata cross-check
Key specifications
Pin-by-pin cross-check
Schematic symbol findings
Footprint cross-check
Footprint mismatches / risks
Overall assessment