Molex Part Audit


Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
I’ll audit the part metadata, locate the official Molex datasheet if needed, update the Datasheet property, then verify the symbol, footprint, and pin definitions against the manufacturer documentation.
Created a thread
Received notification from "Molex Part Audit" that it finished — picking the work back up.
The audit executor is complete. I’m reconciling its report with the live part metadata, symbol terminals, and footprint before closing the review.
Audit reconciled against the live project. The official Molex datasheet URL is now set; the 3-pin symbol and 0.80 mm pitch are correct, with no fatal usability issue found.
  • Flagged: signal pads are 0.0088 mm over Molex’s recommended maximum; hold-down pads are 0.0034 mm over.
  • Incomplete: description and connector parametrics lack key specifications; symbol rendering could not be visually verified.
  • Full details: Part Audit Report
Correct footprint deviations
Improve part metadata
Verify symbol rendering
Complete part cleanup

Pin #
Name
Type
Section
Pin Group
Orientation
Order
Sub-symbol
1
~
Passive
Left
2
~
Passive
Left
3
~
Passive
Left

2147210030