Datasheet Audit
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 7 sec
I’ll audit the part metadata and geometry, locate the official Phoenix Contact datasheet if needed, update the Datasheet property, then report any symbol, footprint, or pin mismatches.
Worked for 1 min 43 sec
Reviewed Phoenix Contact MSTBA 2,5/ 5-G-5,08, MPN 1757271. The existing official Phoenix Contact datasheet is valid, so no property update was necessary.
- Key specs: 5 positions, single row, 5.08 mm pitch, 12 A, 320 V (III/2), through-hole wave soldering, 1 × 1 mm pins, 1.4 mm PCB holes, 3.23 mm pin length, 27.4 × 12 × 11.8 mm body, −40 to +100 °C operation.
- Footprint: Pad count, numbering, 5.08 mm spacing, and 1.4 mm drills match. The drawn body width is 27.32 mm versus 27.4 mm specified, a minor 0.08 mm discrepancy.
- Symbol: Five uniquely numbered terminals are present, but pins alternate between the left and right sides rather than visually representing the linear connector. All pins lack descriptions and have Pin Type = Unspecified.
- Metadata issues: Package/mount is only listed as “Solder” rather than through-hole/wave-soldered; the Compliance = Green property appears to contain the housing color rather than a compliance classification.
Clean metadata and symbol
Fix footprint width
Add complete specifications
Review 3D model fit
