Part Review Mismatch Audit


Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
I’ll review the part metadata, find and set the official datasheet if missing, then compare the symbol/footprint/pin details against it and summarize any mismatches.
I found an existing datasheet URL already set, so I’m using it as the source and not changing the property. I’m now checking the footprint pin coordinates carefully because one pin location may not match the recommended PCB layout.
Created a project doc

Part Review - TE Connectivity 1658998-1

View Document

Date: 2026-07-13 Reviewed available part metadata, schematic terminal definitions, footprint geometry, and datasheet-derived specifications ...
Completed the part review and created the detailed report: Part Review - TE Connectivity 1658998-1.
Key findings: the datasheet URL was already populated, so I did not change it; MPN/manufacturer/specs match TE, but footprint pad 1 appears misplaced versus the TE recommended PCB layout, drill sizes are at the high end of TE’s recommended hole tolerance, and shield/hold-down pads 9–11 are not exposed in the schematic. Suggested next step: fix pad 1 and decide whether the shield tabs should be electrical terminals or mechanical-only pads.
Fix footprint and review
Fix pad 1
Verify drill sizes
Expose shield tabs
Run review checks

Pin #
Name
Type
Section
Pin Group
Orientation
Order
Sub-symbol
1
1
Unspecified
2
2
Unspecified
3
3
Unspecified
4
4
Unspecified
5
5
Unspecified
6
6
Unspecified
7
7
Unspecified
8
8
Unspecified

1658998-1