Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
I’ll review the part metadata and existing symbol/footprint, find the official datasheet if needed, update the Datasheet property, then verify pins and summarize any mismatches.
Pin descriptions are missing: Pin 1 should be Cathode (−), Pin 2 should be Anode (+).
Project-level datasheet still points to an uploaded copy; the official URL is https://www.we-online.com/components/products/datasheet/15412094A9000.pdf.
Footprint has 2 pads, but pad dimensions were not exposed by inspection, so confirm 0.8 mm × 1.5 mm pads and polarity marking in the footprint editor.
Suggested next steps:
Update terminal pin descriptions/pin types.
Replace the project-level datasheet URL with the official Würth URL if editable.
Manually verify footprint pad geometry and cathode/anode orientation.