Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
I’ll inspect the part metadata, look for an official datasheet if missing, update the Datasheet property if needed, then compare symbol/footprint/pins against the source and summarize mismatches.
The project already had a datasheet URL, and I found the official Würth direct PDF as a reference; I’m now comparing the symbol and 3-pad footprint to the datasheet land pattern.
Key result: MPN, A/K polarity, and footprint land-pattern dimensions match; main issues are incomplete pin metadata and a 3rd EP terminal that represents the center thermal/solder pad, while the datasheet defines only 2 electrical LED pins. The Datasheet URL was already set, so I did not overwrite it, but I flagged that it points to an uploaded PDF rather than the official Würth URL.