MAX4466 Part Audit
Worked for 2 mins 18 sec
The official references are confirmed: Adafruit product 1063 and the Analog Devices MAX4465–MAX4469 datasheet. I’m applying the datasheet link now, then I’ll finish the pin and mechanical cross-check.
Worked for 5 mins 56 sec
Audit complete. Added the official Analog Devices MAX4465–MAX4469 datasheet to the part’s Datasheet URL property.
Verified
- Module has 3 pins: 1 OUT, 2 GND, 3 VCC; symbol-to-footprint mapping is consistent.
- Footprint uses 2.54 mm header pitch, two mounting holes, and an approximately 14 × 22 mm module outline.
- Key module specs: 2.4–5 VDC, 25×–125× adjustable gain, VCC/2-biased output, 20 Hz–20 kHz microphone.
- MAX4466 IC: 2.4–5.5 V supply, 24 µA typical current, 600 kHz GBW, 80 nV/√Hz input noise, rail-to-rail output.
Flagged mismatches / omissions
- The MPN is a descriptive name rather than Adafruit’s product identifier 1063.
- No part description or explicit package property is set.
- All pin descriptions are blank.
- GND is classified as
Power In; it should preferably beGround. - The linked datasheet describes the internal 5-pin MAX4466 IC, not the complete 3-pin Adafruit module, so it does not validate the module footprint or mounting-hole geometry.
Fix metadata and pins
Add module datasheet
Create audit report
Run quality review
