Part Datasheet Audit

flux

I found the two-pin part’s indexed schematic symbol data and its associated footprint asset, but the project index does not expose the detailed pad geometry / line geometry contents of the KiCad footprint file.
Schematic symbol pins
The symbol has two terminal pins under the same partUid:
835bf3e1-33dd-41bb-a166-c0a31607d645

Table

Pin numberPin name / designator in indexDescription / part typeElectrical typeSymbol position
11TerminalPassivex = -43, y = 0
22TerminalPassivex = 43, y = 0
Other indexed symbol properties:
  • Designator prefix: P
  • Part Type: Terminal
  • Pin Type: Passive
No separate pin “description” text beyond Part Type: Terminal was present in the component index.
Footprint
The part is associated with this footprint asset:
  • Footprint asset: RESC3216X125N.kicad_mod
  • Asset ID / group: 0ZCJ0200FF2C
  • 3D model asset: 0ZCJ0200FF2C.step
The indexed PCB nodes show:

Table

Footprint nodeTypeDesignator / pad number
ff6305ec-c018-4c1a-8ccb-929e0a9a9b9e.defaultFootprintFootprintFootprint
ff6305ec-c018-4c1a-8ccb-929e0a9a9b9e.defaultFootprint.PadsContainerPads
f1b54a81-c3dd-4144-9cbd-e57f03bc4378Pad1
46f05a77-8988-4664-9660-f10c79f5ca56Pad2
Footprint details not available in the index
The project index confirms theAvailable part/project metadata found for the footprint part appears to be for ** fileBel name Fuse Inc. 0ZCJ0200 andFF2C the**.
presence of pads 1### Part/project metadata and 2, but it does ** fields foundnot

Table

provide Field theValue
exact**Manufacturer Part Number
  • 0Z PadCJ shape -0200FF2C Pad | dimensions
  • Pad spacing| Manufacturer Name / pitch
  • | Bel Fuse Inc. | Pad| Datasheet URL | https://belfuse.com layer set /media/datasheets/products/circuit-protection/ds-c-p-0zcj-series.pdf | Drill /| Part Type | Filter | hole information
  • Silks| **creen geometry
  • Fabrication outline geometry
  • Courtyard or assembly geometry
So, based strictly on the indexed project data, the exact footprint geometry cannot be reported beyond the existence of pads 1 and 2 in the RESC3216X125N.kicad_mod footprint.Designator Prefix** | R |
Symbol / pin metadata found
The indexed component data shows a 2-pin passive terminal-style symbol using the same partUid:

Table

PinMetadata
Pin 1Pin Type: Passive; Part Type: Terminal; Designator Prefix: P; Symbol Pin Position: x=-43, y=0
Pin 2Pin Type: Passive; Part Type: Terminal; Designator Prefix: P; Symbol Pin Position: x=43, y=0
PCB / footprint / asset metadata found

Table

ItemValue
Footprint assetRESC3216X125N.kicad_mod
3D model asset0ZCJ0200FF2C.step
Symbol asset0ZCJ0200FF2C Symbol.svg
Thumbnail asset0ZCJ0200FF2C-thumb.png
PCB model asset rule0ZCJ0200FF2C.step
PCB footprint asset ruleRESC3216X125N.kicad_mod
Pads presentPads 1 and 2
Specifically requested fields

Table

Requested fieldFound value / status
Manufacturer part number0ZCJ0200FF2C
ManufacturerBel Fuse Inc.
Package / caseNo explicit package/case metadata field found. Footprint asset is RESC3216X125N.kicad_mod.
DescriptionNo description field found in indexed project metadata.
Datasheet URLhttps://belfuse.com/media/datasheets/products/circuit-protection/ds-cp-0zcj-series.pdf
Product URL(s)None found in indexed project metadata.
Custom propertiesFound project-level custom properties listed above: Manufacturer Part Number, Manufacturer Name, Datasheet URL, Part Type, Designator Prefix.
Part/library URLNone found in indexed project data.
No additional product URLs, library URLs, package/case field, or description field were available in the indexed project data.

flux

The metadata and datasheet linkage are corrected. I’m doing a final read-back of the updated properties, terminals, and footprint before closing the audit.

flux

Audit completed and verified against the official Bel Fuse datasheet.
  • Corrected metadata: part type, manufacturer, AEC-Q200 compliance, operating temperature, product description, product URL, and terminal descriptions.
  • Attached and verified the official datasheet URL.
  • Confirmed a two-terminal, non-polarized passive symbol and a compatible 1206/3216 SMD footprint.
  • Key ratings: 2.00 A hold, 3.50 A trip, 6 VDC maximum, 100 A fault current, 0.018 Ω minimum resistance, and −40°C to +85°C operation.
  • No proven symbol, pin-numbering, or footprint mismatch remains; footprint geometry was preserved.
Export part data
Run library review
Check BOM fields
2
Pin Number
2
1
Pin Number
1

No files yet

Documents

    Documents are markdown text files which describe project goals, capture details, or even simulation outputs.

    Assets

    0ZCJ0200FF2C

    0ZCJ0200FF2C Symbol.svgDefault

    0ZCJ0200FF2C

    RESC3216X125N.kicad_modFootprint
    0ZCJ0200FF2C

    0ZCJ0200FF2C

    0ZCJ0200FF2C.step3D Model
    0ZCJ0200FF2C-thumb.png

    0ZCJ0200FF2C-thumb.png

    0ZCJ0200FF2C-thumbThumbnail

    0ZCJ0200FF2C

    0ZCJ0200FF2C thumbnail
    Bel Fuse Inc. 0ZCJ0200FF2C — AEC-Q200 compliant, non-polarized 1206 (3216 metric) surface-mount polymeric PTC resettable fuse; 2.00 A hold current, 3.50 A trip current, 6 Vdc maximum voltage.

    Properties

    belfuse.com/products/circuit-protection/ptc-resettable-fuses/0zcj0200ff2c

    AEC-Q200

    0ZCJ0200FF2C

    Non-polarized 1206 polymeric PTC resettable fuse. IH 2.00 A; IT 3.50 A; Vmax 6 Vdc; Imax 100 A; Pd typ 0.8 W; max trip 8.00 A/1.50 s; Rmin 0.018 ohm; R1max 0.080 ohm; -40 to +85 C; AEC-Q200 compliant.

    -40 to +85 °C

    Bel Fuse Inc.

    Protection

    belfuse.com/media/datasheets/products/circuit-protection/ds-cp-0zcj-series.pdf

    R

    Pricing & Availability

    DPN

    Stock

    Qty 1

    3

    0–102K

    $0.1785–$0.5289

    1

    73

    $0.3436

    1

    26K

    $0.2657

    Controls