Part Data Review and Verification
Worked for 1 min 2 sec
Thought for 9 sec
Created 5 tasks.
1/5 Inspect project metadata, schematic symbol pins/properties, and PCB footprint
Thought for 5 sec
Reading schematic details.
Getting project info.
Reading layout details.
Thought for 6 sec
4/5 Cross-check symbol, footprint, and pin descriptions against datasheet
Inspect project metadata, schematic symbol pins/properties, and PCB footprint
Find official datasheet if Datasheet URL is missing
Update Datasheet URL property if needed
Cross-check symbol, footprint, and pin descriptions against datasheet
Create concise review report and summarize mismatches
Thought for 5 sec
Reading "[Datasheet for 09185606324, HARTING] HARTING 09185606324 connector specifications pin count rows pitch termination tail length dimensions drawing" in 3bed5b265dd1b913a503feeafa7f149f01868e7b1ffae00f22a3e654a3096263.pdf.
Provide a concise direct to the point best description for this part based from the datasheet. i don't need a very long but useless description.
Thought for 5 sec
Got it — I’ll keep the description concise and datasheet-based, and fold it into the metadata review.
Worked for 45 sec
Updated the project description to:
HARTING SEK Low-profile 60-position 2-row straight male IDC header, 2.54 mm pitch, through-hole wave-solder, 2.9 mm tails, PL2.
Review complete: MPN/manufacturer/contact count match the datasheet; symbol has 60 numbered terminals; footprint has 60 pads. Flagged items: pins are typed
Unspecified instead of Passive, and detailed footprint dimensions should still be checked against the HARTING drawing. Full notes are in part-review-harting-09185606324.Fix pins, verify footprint
Set pins Passive
Verify footprint dimensions
Run DRC review
Update Datasheet URL
Refine this doc
Ask about this doc
Part Review: HARTING 09185606324
Concise description
HARTING SEK Low-profile 60-position 2-row straight male IDC header, 2.54 mm pitch, through-hole wave-solder, 2.9 mm tails, PL2.
Source reviewed
- Existing Datasheet URL property is already populated with an uploaded PDF.
- Datasheet identifies the official HARTING eCatalogue page: https://harting.com/09185606324
- Web search found a distributor-hosted copy of the HARTING product data sheet: https://docs.rs-online.com/e3bd/0900766b80de2bde.pdf
Key datasheet specs
- Manufacturer: HARTING
- Manufacturer part number: 09 18 560 6324 / 09185606324
- Specification: SEK-18 SV MA LP STR29 60P PL2
- Series: SEK Low-profile
- Type: Male connector/header
- Connection: PCB-to-cable / PCB-to-PCB
- Termination: Wave soldering, through-hole
- Contact style: Straight
- Contact count: 60
- Rows: 2
- Pitch / contact spacing: 2.54 mm
- Termination length: 2.9 mm
- Rated current: 1 A
- Test voltage: 1 kV RMS
- Insulation resistance: >1 GΩ
- Contact resistance: ≤20 mΩ
- Temperature range: -55 °C to +125 °C
- Mating cycles: ≥250
- Performance level: 2 per IEC 60603-13
- Insert material: PBT thermoplastic, grey, UL 94 V-0
- Contact material/plating: copper alloy; noble metal over Ni mating side; Sn over Ni termination side
- Packaging size: 50
- Net weight: 6.9 g
Symbol check
- The schematic contains 60 terminal entries with pin numbers 1 through 60.
- Pin count matches the datasheet contact count.
- The symbol arrangement is two-sided with odd-numbered contacts on the left and even-numbered contacts on the right, which is appropriate for a 2-row connector representation.
- Pin Type is set to
Unspecifiedfor all terminals. For a passive connector this is acceptable, thoughPassivewould be more semantically precise. - Pin descriptions are not populated beyond pin numbers. For this connector, the datasheet does not assign unique signal names, so numeric pin labeling is sufficient.
Footprint check
- The PCB footprint contains 60 pad nodes plus footprint/container/shape/text nodes.
- Pad count matches the datasheet contact count.
- The footprint is consistent at a high level with a 60-position through-hole connector.
- Detailed mechanical verification is limited because the inspected layout data did not expose pad geometry, drill size, pitch, row spacing, or full body outline dimensions. These should be checked against the HARTING drawing before release.
Mismatches / risks flagged
- No hard mismatch found for MPN, manufacturer, contact count, or high-level connector type.
- Existing Datasheet URL is an uploaded PDF rather than the official HARTING product page; acceptable because a datasheet is present, but the official page is https://harting.com/09185606324.
- Pin Type is
Unspecified; recommend changing terminals toPassiveif strict library hygiene is desired. - Footprint geometry needs dimensional verification against the manufacturer drawing: 2.54 mm pitch, 2 rows, 2.9 mm tail length, and 60-contact body dimensions.
Concise description
Source reviewed
Key datasheet specs
Symbol check
Footprint check
Mismatches / risks flagged
