I’ll inspect the part metadata and geometry, find and set the official datasheet if it’s missing, then compare symbol/footprint/pin details against the datasheet and summarize mismatches.
The project already has a Molex datasheet URL, and I also found the current official Molex customer drawing for the exact 0469990138 / 46999-0138 part number; I’ll update the part-level reference to that Molex-hosted drawing if the property editor accepts it.
Worked for 5 mins 16 sec
Created a project doc
Part Verification Report: Molex Mini-Fit Jr. Header
Completed the part review and updated the Datasheet URL to the official Molex customer drawing for 46999-0138 / 0469990138. I created the detailed findings in Part Verification Report: Molex Mini-Fit Jr. Header.
Open items:
Schematic pin descriptions are missing/undefined.
Pin Type is still Unspecified; Passive would be clearer.
Mount metadata is broad (PCB) rather than explicitly through-hole.
Suggested next steps:
Add pin descriptions for circuit 1 and circuit 2.
Normalize connector metadata: through-hole mount, passive pins, Mini-Fit Jr. role details.
Visually confirm the STEP model alignment in 3D before publishing/reuse.