Part Datasheet Audit


Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
I’ll audit the part metadata, locate the official datasheet if needed, update the Datasheet property, then compare the symbol, footprint, and pin definitions against the manufacturer documentation.
Audit complete for Molex 0346910162 / 34691-0162.
  • Datasheet: Already set to the official Molex URL; no update was required.
  • Key specs: Stac64 right-angle, through-hole automotive header; 16 circuits, 2 rows, 2.54 mm pitch, polarization C, brown housing; 10 A/contact, 500 V max, −40 to +105 °C.
  • Symbol: 16 terminals numbered 1–16 match the 16 electrical circuits. Pin descriptions and electrical types are missing/unspecified.
  • Footprint: Correct 2×8 arrangement and 2.54 mm pitch. Signal-hole drill is 1.27 mm, within the datasheet’s Ø1.20 ±0.08 mm recommendation.
  • Flagged mismatch: The two locator holes are Ø2.6924 mm. The available Molex drawing specifies Ø2.60 mm for press-fit locators or Ø3.05 mm for drop-in locators, so the intended locator style should be confirmed before manufacturing.
  • Metadata issue: Package/case is listed as generic “TO”, which does not accurately describe this connector footprint.
Fix metadata and terminals
Resolve locator-hole mismatch
Create part audit report

2
Pin Number
2
4
Pin Number
4
1
Pin Number
1
3
Pin Number
3
Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
1
1
Unspecified
2
2
Unspecified
3
3
Unspecified
4
4
Unspecified
5
5
Unspecified
6
6
Unspecified
7
7
Unspecified
8
8
Unspecified
9
9
Unspecified
10
10
Unspecified
11
11
Unspecified
12
12
Unspecified
13
13
Unspecified
14
14
Unspecified
15
15
Unspecified
16
16
Unspecified

0346910162