An electronic circuit that produces an inverted version of the input at its output.

Equal to an AND gate followed by a NOT gate. The outputs of all NAND gates are high if any of the inputs are low.

Equal to an AND gate followed by a NOT gate. The outputs of all NAND gates are high if any of the inputs are low.

3.8V to 32V Input, 2A Low Quiescent Current Synchronous Buck Converter with Enhanced EMI Suppression The AP63200/AP63201/AP63203/AP63205 is a 2A, synchronous buck converter with a wide input voltage range of 3.8V to 32V and fully integrates a 125mΩ high-side power MOSFET and a 68mΩ low-side power MOSFET to provide high-efficiency step-down DC/DC conversion. The AP63200/AP63201/AP63203/AP63205 device is easily used by minimizing the external component count due to its adoption of peak current mode control along with its integrated compensation network. The AP63200/AP63201/AP63203/AP63205 has optimized designs for Electromagnetic Interference (EMI) reduction. The converter features Frequency Spread Spectrum (FSS) with a switching frequency jitter of ±6%, which reduces EMI by not allowing emitted energy to stay in any one frequency for a significant period of time. It also has a proprietary gate driver scheme to resist switching node ringing without sacrificing MOSFET turn-on and turn-off times, which further erases highfrequency radiated EMI noise caused by MOSFET switching. The device is available in a low-profile, TSOT26 package • VIN 3.8V to 32V • 2A Continuous Output Current • 0.8V ±1% Reference Voltage • 22µA Ultralow Quiescent Current • Switching Frequency o 500kHz: AP63200 and AP63201 o 1.1MHz: AP63203 and AP63205 • Pulse Width Modulation (PWM) Regardless of Output Load o AP63201 • Supports Pulse Frequency Modulation (PFM) o AP63200, AP63203, and AP63205 o Up to 80% Efficiency at 1mA Light Load o Up to 88% Efficiency at 5mA Light Load • Fixed Output Voltage o 3.3V: AP63203 o 5.0V: AP63205 • Proprietary Gate Driver Design for Best EMI Reduction • Frequency Spread Spectrum (FSS) to Reduce EMI • Precision Enable Threshold to Adjust UVLO • Protection Circuitry o Overvoltage Protection o Cycle-by-Cycle Peak Current Limit o Thermal Shutdown #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Switching-regulator

3.8V to 32V Input, 2A Low Quiescent Current Synchronous Buck Converter with Enhanced EMI Suppression The AP63200/AP63201/AP63203/AP63205 is a 2A, synchronous buck converter with a wide input voltage range of 3.8V to 32V and fully integrates a 125mΩ high-side power MOSFET and a 68mΩ low-side power MOSFET to provide high-efficiency step-down DC/DC conversion. The AP63200/AP63201/AP63203/AP63205 device is easily used by minimizing the external component count due to its adoption of peak current mode control along with its integrated compensation network. The AP63200/AP63201/AP63203/AP63205 has optimized designs for Electromagnetic Interference (EMI) reduction. The converter features Frequency Spread Spectrum (FSS) with a switching frequency jitter of ±6%, which reduces EMI by not allowing emitted energy to stay in any one frequency for a significant period of time. It also has a proprietary gate driver scheme to resist switching node ringing without sacrificing MOSFET turn-on and turn-off times, which further erases highfrequency radiated EMI noise caused by MOSFET switching. The device is available in a low-profile, TSOT26 package • VIN 3.8V to 32V • 2A Continuous Output Current • 0.8V ±1% Reference Voltage • 22µA Ultralow Quiescent Current • Switching Frequency o 500kHz: AP63200 and AP63201 o 1.1MHz: AP63203 and AP63205 • Pulse Width Modulation (PWM) Regardless of Output Load o AP63201 • Supports Pulse Frequency Modulation (PFM) o AP63200, AP63203, and AP63205 o Up to 80% Efficiency at 1mA Light Load o Up to 88% Efficiency at 5mA Light Load • Fixed Output Voltage o 3.3V: AP63203 o 5.0V: AP63205 • Proprietary Gate Driver Design for Best EMI Reduction • Frequency Spread Spectrum (FSS) to Reduce EMI • Precision Enable Threshold to Adjust UVLO • Protection Circuitry o Overvoltage Protection o Cycle-by-Cycle Peak Current Limit o Thermal Shutdown #CommonPartsLibrary #IntegratedCircuit #PowerManagement

Cellular EDGE, GPRS, GSM, HSPA+, LTE, UMTS Transceiver Module 900MHz, 1.8GHz Antenna Not Included Surface Mount The SIM7600E-H is a multi-mode LTE module that supports: LTE (4G) Cat-4 with up to 150 Mbps download / 50 Mbps upload 3G (UMTS/HSPA+) 2G (GSM/GPRS/EDGE) fallback for global network compatibility It is built in a compact SMT/LCC package (about 30 × 30 mm) and is widely used for embedded devices that need mobile internet and GNSS positioning Key Features Network support LTE-FDD / LTE-TDD (global bands depending on variant) UMTS/HSPA+ GSM/GPRS/EDGE fallback Data speed LTE Cat-4: up to 150 Mbps downlink 3G/2G fallback for lower-speed connectivity GNSS built-in GPS / GLONASS / other satellite positioning support Interfaces USB 2.0 UART GPIO I2C ADC PCM (audio support) SIM card interface Software / protocols AT command control TCP/IP, UDP, HTTP, HTTPS, FTP, DNS Driver support for Windows, Linux, Android Power supply ~3.4V to 4.2V typical operating range Operating temperature -40°C to +85°C (industrial grade) Typical Applications IoT devices GPS trackers Smart metering Industrial routers / gateways Remote monitoring systems Vehicle telematics Point-of-sale terminals #commonpartslibrary #rf #wireless #transceiver #module

Cellular, Navigation BeiDou, EGDE, Galileo, GLONASS, GPS, GNSS, GSM, LTE Transceiver Module 850MHz, 900MHz, 1.8GHz, 1.9GHz Antenna Not Included Surface Mount The BG95M3LA-64-SGNS is a compact low-power LTE cellular communication module designed for IoT, telematics, asset tracking, industrial automation, and embedded wireless applications. The module supports global LTE Cat M1, Cat NB2, and EGPRS connectivity, enabling reliable wide-area wireless communication for battery-powered and mobile embedded systems. The device integrates cellular modem functionality, GNSS positioning capability, power management features, and multiple peripheral communication interfaces within a highly compact surface-mount package optimized for space-constrained embedded designs. The module is engineered for low-power operation, making it suitable for long-life IoT deployments requiring efficient wireless connectivity. The BG95M3LA-64-SGNS supports integrated satellite positioning technologies including GPS, GLONASS, Galileo, and BeiDou for location-aware applications. Its robust RF performance and industrial-grade operating capability allow deployment in harsh environmental conditions and demanding remote monitoring systems. The module provides comprehensive support for embedded communication protocols and is commonly used in smart meters, telematics units, industrial gateways, environmental monitoring systems, fleet tracking devices, and connected sensor platforms. Key Features LTE Cat M1 cellular communication support LTE Cat NB2 narrowband IoT capability EGPRS fallback connectivity Integrated GNSS positioning functionality Low-power optimized architecture Global wireless network compatibility Compact surface-mount module design Embedded TCP/IP protocol stack support UART, USB, and serial communication interfaces Integrated power management subsystem Industrial operating temperature support Embedded IoT connectivity optimization High-reliability wireless communication platform Multi-constellation satellite navigation support Electrical Characteristics Low operating power consumption Wide input voltage support High RF sensitivity performance Embedded low-power sleep functionality Stable wireless communication architecture Integrated RF and baseband processing Optimized antenna interface support Industrial-grade reliability performance Fast network registration capability Applications IoT and M2M communication systems Asset tracking devices Fleet management platforms Smart utility metering Industrial automation equipment Remote environmental monitoring Smart agriculture systems Telematics and transportation electronics Portable wireless data terminals Embedded gateway systems Smart city infrastructure Connected sensor platforms Package Information Package Type: LGA Module Mounting Type: Surface Mount Compact embedded wireless module package RoHS compliant configuration available #commonpartslibrary #wirelessmodule #lte #iot #embeddedhardware #cellularcommunication #gnss #telematics #industrialautomation #assettracking