• Robo Project

    Robo Project

    The Robo Project is a mobile robotic platform featuring a Particle Argon board, 4 motor-wheels controlled by L293D drivers, and an HC-SR04 ultrasonic sensor for obstacle detection. It's ideal for exploration, remote control, and robotics education. #allThingsRobotics #project #robot #L293D #car

    particle

    particle

    &

    nico
    jharwinbarrozo

    71 Comments

    38 Stars

  • The Green Dot 2040E5 Board

    The Green Dot 2040E5 Board

    The "Green Dot 2040E5" Board is a Node that interfaces RS485 Sensor probes and can log information to the cloud using LoRa Connectivity. It uses the XIAO RP2040 and the LoRa-E5 (STM32WLE5JC) modules from Seeed Studio to do its magic. It also has amazing power management capabilities (Solar charging, Battery protection, etc) that make it very useful for IoT applications #internetOfThings #smartHomeDevices #SeeedStudio #XIAO #LoRa #RP2040 #IoT

    seeedstudio

    seeedstudio

    &

    jharwinbarrozo
    collinsemasi
    janeyang
    +2

    339 Comments

    35 Stars

  • ENVIRONMENTAL EXPOSURE RISK METER

    ENVIRONMENTAL EXPOSURE RISK METER

    Environmental exposure risk measuring device based on ESP32, ultraviolet light (UV) and CO2 gas sensor modules. It has a voltage booster based on MT3608 chip and a solar panel lithium battery charger with MPPT based on CN3791 chip.

    jr98

    jr98

    1 Comment

    31 Stars

  • Portable LoRaWAN board

    Portable LoRaWAN board

    Ultra-Low-Power Solar CO₂ Monitor with Programmable LoRa-E5, Low-Power I²C CO₂ Sensor, MPPT Solar Input and 10-Year Battery Life #co2 #lowpower #mppt #solar #lora #stm

    vasyl

    vasyl

    89 Comments

    22 Stars

  • ArduinoMicro-MidiFreak

    ArduinoMicro-MidiFreak

    Arduino Micro - MIDI Controller It uses the Arduino Micro as USB midi controller. It has 1 capacitive touch octave (12 Keys), 2 rotary encoders, a button, and a proximity sensor that can be used as a mod wheel, sustain pedal or MPE. The oled screen displays the different configuration options. It can be set to any channel or C.C. so it can be used to modify other instruments behavior. The capacitive touch keys can also be used as 12 drum machine pads.

    ebarranco

    ebarranco

    35 Comments

    21 Stars

  • Robo Project

    Robo Project

    The Robo Project is a mobile robotic platform featuring a Particle Argon board, 4 motor-wheels controlled by L293D drivers, and an HC-SR04 ultrasonic sensor for obstacle detection. It's ideal for exploration, remote control, and robotics education. #project #robot #L293D #car

    vasy_skral

    vasy_skral

    24 Comments

    18 Stars

  • SmokeSensor_ShieldCompetition

    SmokeSensor_ShieldCompetition

    Arduino Uno shield used to monitor chimney smoke and provide feedback to stove. This shield powers the Arduino using TEGs and a battery. This shield provides power to an LED, fans, and a light sensor used to detect light intensity.

    tpetrovic2

    tpetrovic2

    11 Stars

  • WiFi Camera with Motion Detection Reference Design

    WiFi Camera with Motion Detection Reference Design

    This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control. #WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design.

    vasy_skral

    vasy_skral

    &

    cherepanyadima

    146 Comments

    8 Stars

  • Native Bee Hotel V2

    Native Bee Hotel V2

    Minimal ESP32-CAM Breakout for RCWL-0516 Radar Sensor

    markwuflux

    markwuflux

    6 Stars

  • Environmental Data Logger Copilot V2 Example Project

    Environmental Data Logger Copilot V2 Example Project

    Overview: BME280 Sensor data -> uSD card Click on the bubble comments to see copilot design this project! Very impressed copilot routed all the SPI buses accurately for me. TODO: Just realized that there is no footprint for the SD Card holder, gotta add that Also, there needs to be a way to program the ATTINY841, Probably over UART?

    markwuflux

    markwuflux

    6 Stars

  • Grove Vision AI Module V2 schematics alpha v0.2

    Grove Vision AI Module V2 schematics alpha v0.2

    Here is the schematic of grove vision ai v2. with this you can edit and customize your vision sensor to incorporate with you own projects

    seeedstudio

    seeedstudio

    &

    5 Stars

  • LoRa temperature sensor Reference Design

    LoRa temperature sensor Reference Design

    This project is a LoRa temperature sensor. It uses the RP2040 microcontroller and a SHT31 temperature sensor and also RFM95 for LoRa communication #LoRa #referenceDesign #simple-embedded #raspberrypi #template #reference-design

    vasyl

    vasyl

    26 Comments

    3 Stars

  • Raspberry Pi Pico Sensor HAT 46be

    Raspberry Pi Pico Sensor HAT 46be

    The Pico-Environment-Sensor gives Raspberry Pi Pico the ability to collect environment data like temperature & humidity, air pressure, ambient light #RaspberryPi #Raspberry #Pi #RPi #Pico #template #project #project-template #hat

    nico

    nico

    1 Comment

    3 Stars

  • Radar Sensor XM125

    Radar Sensor XM125

    Turn a PC or Raspberry Pi into a radar lab. Plug-and-play USB-C, protected data lines, dual serial channels, and full access to reset/boot/I2C/UART/SWD for demos, evaluation, and algorithm prototyping.

    vasy_skral

    vasy_skral

    &

    jharwinbarrozo

    3 Stars

  • Biskuit AI: Project Showcase

    Biskuit AI: Project Showcase

    Kitchen LED Strip Motion & Ambient-Light Controller with 12 V PWM Dimming, PIR Sensor, Ambient Light Sensor, MCU Control, Buck Regulator, and Protection Circuits (TVS, PTC Fuse, Reverse-Polarity Diode) #KitchenLEDController #MotionDetection #AmbientLightSensor

    collinsemasi

    collinsemasi

    55 Comments

    3 Stars

  • Willing Gold Gadget Copter

    Willing Gold Gadget Copter

    Un proyecto en donde un arduino es alimetado por un panel solar que carga 3 pilas que suman 9 v. Del arduino está conectado una tira de luces rgb que se prenden segun el nivelde CO que es medido por un sensor de Co

    danmur

    &

    35 Comments

    3 Stars

  • OctoPower

    OctoPower

    OctoPower is a monitoring hardware, it provides an end-to-end electricity monitoring solution perfect for monitoring home consumption, solar generation or any AC electrical circuit for that matter. Key features : - 8x clip-on CT current sensor - Full Real/Active power measurement & continuous sampling. - Cumulative energy persisted on reboot. - Wifi (with WPS) and Ethernet support - It send all data on mqtt topic - It can be configurable mqtt topics, calibration, enable/disable wifi over a mqtt api - Upgrade firmware over local network

    pyrou

    &

    +3

    17 Comments

    3 Stars

  • LoRa soil monitor Reference Design

    LoRa soil monitor Reference Design

    This is a LoRa soil monitor Reference Design. It uses a STM32L031G6U6S microcontroller and a RFM95W-915S2 LoRa transceiver, integrated with sensor interfacing and LED indicators. Communication occurs via USART and SPI. The system is powered using a battery. #referenceDesign #simple-embedded #stm #template #reference-design

    vasyl

    vasyl

    &

    14 Comments

    3 Stars

  • ArduinoMicro-MidiFreak-PB

    ArduinoMicro-MidiFreak-PB

    Arduino Micro - MIDI Controller It uses the Arduino Micro as USB midi controller. It has 1 capacitive touch octave (12 Keys), 2 rotary encoders, a button, and a proximity sensor that can be used as a mod wheel, sustain pedal or MPE. The oled screen displays the different configuration options. It can be set to any channel or C.C. so it can be used to modify other instruments behavior. The capacitive touch keys can also be used as 12 drum machine pads.

    datnapafunk

    6 Comments

    3 Stars

  • MGM240P Example

    MGM240P Example

    This is a project of an energy-efficient temperature and humidity sensor that works via Zigbee #Zigbee #sensor #iot #template #project

    vasyl

    vasyl

    3 Stars

  • Capacitive Moisture Sensor (Corrosion-Resistant)

    Capacitive Moisture Sensor (Corrosion-Resistant)

    Capacitive Moisture Sensor (Corrosion Resistant) is a soil moisture sensor based on capacitance changes

    vasyl

    vasyl

    1 Comment

    2 Stars

  • LoRa Door and Window Sensor Reference Design bbYa

    LoRa Door and Window Sensor Reference Design bbYa

    This is a LoRa-based door and window sensor incorporating a microcontroller unit (MCU). It features a reed sensor, LED indicators, a AAA non-rechargeable battery, and a booster IC for constant voltage. The MCU is linked to peripherals through nets, ensuring optimal performance #LoRa #MCU #ReferenceDesign #project #referenceDesign #simple-embedded #seeed #seeed-studio #template #reference-design

    yeisondurango

    1 Comment

    2 Stars

  • FSAE temperature sensor

    FSAE temperature sensor

    PCB that sends ambient temperature and high resolution analog data over a CAN bus for a FSAE electric car. Runs off a Teensy 4.0 and has connection pins for separate external analog sensors.

    michaelkd

    7 Comments

    2 Stars

  • Capacitive Soil Sensor

    Capacitive Soil Sensor

    vasyl

    vasyl

    2 Stars

  • Robo Project

    Robo Project

    The Robo Project is a mobile robotic platform featuring a Particle Argon board, 4 motor-wheels controlled by L293D drivers, and an HC-SR04 ultrasonic sensor for obstacle detection. It's ideal for exploration, remote control, and robotics education. #project #robot #template #L293D #car

    datnapafunk

    &

    25 Comments

    2 Stars

  • The Green Dot 2040E5 Board

    The Green Dot 2040E5 Board

    The "Green Dot 2040E5" Board is a Node that interfaces RS485 Sensor probes and can log information to the cloud using LoRa Connectivity. It uses the XIAO RP2040 and the LoRa-E5 (STM32WLE5JC) modules from Seeed Studio to do its magic. It also has amazing power management capabilities (Solar charging, Battery protection, etc) that make it very useful for IoT applications #Seeed #XIOA #LoRa #RP2040 #IoT

    kerry

    24 Comments

    2 Stars

  • Gesture Light Switch Relay Reference Design

    Gesture Light Switch Relay Reference Design

    This project is a Gesture Light Switch Relay Reference Design. It involves an STM32 microcontroller (STMicroelectronics) that interacts with an APDS-9960 sensor (Broadcom) to detect hand gestures. The gesture data is used to control a Toshiba TLP175A relay and an Everlight tri-color LED to switch the light and change colors, respectively. Power is supplied by a Diodes Incorporated's AP2112K-3.3TRG1 regulator. #referenceDesign #edge-computing #edgeComputing #stm #relay #sensors #reference-design

    vasyl

    vasyl

    21 Comments

    2 Stars

  • The Green Dot 2040E5 Board krN5

    The Green Dot 2040E5 Board krN5

    The "Green Dot 2040E5" Board is a Node that interfaces RS485 Sensor probes and can log information to the cloud using LoRa Connectivity. It uses the XIAO RP2040 and the LoRa-E5 (STM32WLE5JC) modules from Seeed Studio to do its magic. It also has amazing power management capabilities (Solar charging, Battery protection, etc) that make it very useful for IoT applications #Seeed #XIOA #LoRa #RP2040 #IoT

    nico

    nico

    18 Comments

    2 Stars

  • VL53L4CD Reference Design

    VL53L4CD Reference Design

    This project is a reference design for a VL53L4CD-based sensor circuit. It incorporates the use of a Texas Instruments LP5907MFX-2.8/NOPB to regulate the supply voltage. #referenceDesign #VL53L4CD #project #template #LIDAR #sensor #distance #referenceDesign #industrialsensing #stm #template #reference-design #polygon

    vasy_skral

    vasy_skral

    7 Comments

    2 Stars

  • Interruptor de luz con control gestual

    Interruptor de luz con control gestual

    This project is a Gesture Light Switch Relay Reference Design. It involves an STM32 microcontroller (STMicroelectronics) that interacts with an APDS-9960 sensor (Broadcom) to detect hand gestures. The gesture data is used to control a Toshiba TLP175A relay and an Everlight tri-color LED to switch the light and change colors, respectively. Power is supplied by a Diodes Incorporated's AP2112K-3.3TRG1 regulator. #referenceDesign #edge-computing #edgeComputing #stm #relay #sensors #reference-design

    jorgeariasuisrael

    5 Comments

    2 Stars

  • Vending Machine Controller

    Vending Machine Controller

    Controller for vending machine. Use stm32f407, pressure sensor HX711, FRAM, TFT display connectivity.

    adrian95

    &

    jharwinbarrozo

    3 Comments

    2 Stars

  • Triple-Axis Accelerometer

    Triple-Axis Accelerometer

    The LIS3DH is a very popular low power triple-axis accelerometer. It's low-cost, but has just about every 'extra' you'd want in an accelerometer. This sensor communicates over I2C or SPI (our library code supports both) so you can share it with a bunch of other sensors on the same I2C bus. There's an address selection pin so you can have two accelerometers share an I2C bus

    adrian95

    &

    jharwinbarrozo

    1 Comment

    2 Stars

  • Native Bee Hotel V2.5

    Native Bee Hotel V2.5

    This bee hotel version is an intermediary version that implements some featuresets. The main feature that we are leaving out is Matter support over Zigbee (for a wider range in the backyard). In this version, we are implmenting: -Legacy WiFi/BT connectivity. -Camera with flash capability -Solar Charging -Energy Storage -Humidity and Temp Sensor

    markwuflux

    markwuflux

    2 Stars

  • WiFi Door and Window Sensor

    WiFi Door and Window Sensor

    This project is a WiFi-enabled door and window sensor using the ESP8684-WROOM-02C module from Espressif Systems. It includes a triple-color LED indicator, Reed switch for detection, a 3.3V Regulatory mechanism, and USB C for firmware flashing. It's powered by a regular non-rechargeable AAA battery. #WiFi #MCU #ReferenceDesign #project #ESP8684 #referenceDesign #simple-embedded #espressif

    vasy_skral

    vasy_skral

    &

    cherepanyadima

    17 Comments

    1 Star

  • ACS712 current sensor layout example

    ACS712 current sensor layout example

    Compact ACS712 current sensor module, capable of measuring up to 20A of AC or DC current. The layout includes a 2-pin connector for the input current, a terminal for the output voltage, and two capacitors for noise reduction. #template #project #sensor #current_sensor #ACS712

    vasy_skral

    vasy_skral

    9 Comments

    1 Star

  • BLE Door and Window Sensor Reference Design

    BLE Door and Window Sensor Reference Design

    This project is a BLE door and window sensor design that uses a U-blox BMD-330-A-R for BLE communication, a reed switch as a sensor, a multi-color LED for status display, and is powered by VBAT. There's also a programming interface and reset switch included. #WiFi #BLE #MCU #ReferenceDesign #project #referenceDesign #simple-embedded #ublox #template #reference-design

    vasy_skral

    vasy_skral

    6 Comments

    1 Star

  • Infidel Sensor

    Infidel Sensor

    The InFiDEL is a cheap (< $5) filament diameter sensor intended for use with FDM 3d printers. The sensor can be calibrated to provide surprisingly precise filament diameter readings in real-time. The main idea is to use the sensor to correct for filament diameter deviations while printing

    adrian95

    &

    jharwinbarrozo

    1 Comment

    1 Star

  • ESP Breakout Board with LCD and DHT Sensor

    ESP Breakout Board with LCD and DHT Sensor

    ESP Dev-Kit V1 breakout board with connections to LCD screen and DHT Temperature Sensor.

    agarci317

    1 Comment

    1 Star

  • LoRa temperature sensor Reference Design

    LoRa temperature sensor Reference Design

    This project is a LoRa temperature sensor. It uses the RP2040 microcontroller and a SHT31 temperature sensor and also RFM95 for LoRa communication #LoRa #referenceDesign #simple-embedded #raspberrypi #template #reference-design

    andresroa

    1 Star

  • MQ SENSOR PCB

    MQ SENSOR PCB

    MQ SENSOR PCB DESIGNING 2 model

    mounika

    1 Star

  • Light Sensor Template2

    Light Sensor Template2

    Sensor using through hole LDR and power with SMT LED Resistors and PZT3904

    amguo

    1 Star

  • Light Sensor Template2

    Light Sensor Template2

    Sensor using through hole LDR and power with SMT LED Resistors and PZT3904

    tanejeah

    &

    1 Star

  • Light Sensor Template2

    Light Sensor Template2

    Sensor using through hole LDR and power with SMT LED Resistors and PZT3904

    dimples

    &

    1 Star

  • Thermal Light Sensor

    Thermal Light Sensor

    Welcome to your new project. Imagine what you can build here.

    dreip

    &

    21 Comments

    1 Star

  • Rain Sensor

    Rain Sensor

    Welcome to your new project. Imagine what you can build here.

    s4myuuel

    4 Comments

    1 Star

  • Light Sensor

    Light Sensor

    Welcome to your new project. Imagine what you can build here.

    jgitahi

    3 Comments

    1 Star

  • FLAME SENSOR

    FLAME SENSOR

    Welcome to your new project. Imagine what you can build here.

    mounika

    1 Comment

    1 Star

  • Sensor de movimiento

    Sensor de movimiento

    Welcome to your new project. Imagine what you can build here.

    elith

    1 Comment

    1 Star

  • RF Energy Harvesting IoT Sensor Node

    RF Energy Harvesting IoT Sensor Node

    Welcome to your new project. Imagine what you can build here.

    omertopbas

    1 Star

  • Tracer Sensor 5.1

    Tracer Sensor 5.1

    Welcome to your new project. Imagine what you can build here.

    mekicaman

    1 Star