This project is a LoRa temperature sensor. It uses the RP2040 microcontroller and a SHT31 temperature sensor and also RFM95 for LoRa communication #LoRa #referenceDesign #simple-embedded #raspberrypi #template #reference-design

The Pico-Environment-Sensor gives Raspberry Pi Pico the ability to collect environment data like temperature & humidity, air pressure, ambient light #RaspberryPi #Raspberry #Pi #RPi #Pico #template #project #project-template #hat

This is a project of an energy-efficient temperature and humidity sensor that works via Zigbee #Zigbee #sensor #iot #template #project

PCB that sends ambient temperature and high resolution analog data over a CAN bus for a FSAE electric car. Runs off a Teensy 4.0 and has connection pins for separate external analog sensors.

Weather Station controlled by STM32F031F6P6 MCU. 2x humidity and temperature sensors. USB powered

The AAduino is an wireless Arduino clone the size of an AA battery with Keystone battery terminals rotated 180° to act as positive and negative terminals. It is meant to go inside a 3xAA battery holder creating a very small wireless node. Powered by an ATMega328p, it is fitted with an RFM69CW companion, two DS18B20 temperature sensors and an indicator LED

This project is a LoRa temperature sensor. It uses the RP2040 microcontroller and a SHT31 temperature sensor and also RFM95 for LoRa communication #LoRa #referenceDesign #simple-embedded #raspberrypi #template #reference-design

High-Frequency Full-Bridge Series-Resonant Converter with LM331 and TL431-Based Inverse-Control System for 330–385V HV DC Bus Regulation

The AD8495 K-type thermocouple amplifier from Analog Devices is so easy to use, we documented the whole thing on the back of the tiny PCB. Power the board with 3-18VDC and measure the output voltage on the OUT pin. You can easily convert the voltage to temperature with the following equation: Temperature = (Vout - 1.25) / 0.005 V. So for example, if the voltage is 1.5VDC, the temperature is (1.5 - 1.25) / 0.005 = 50°C with terminal block connections

Fire Alarm circuit project, a thermistor works as the heat sensor. When temperature increases, its resistance decreases, and vice versa. Fire Alarm system works off a 6V-12V regulated power supply. Timer IC NE555 (IC1) is wired as an astable multivibrator oscillating in audio frequency band.

Product Type: Wearable AI pendant Primary Function: Records audio, generates transcripts, and organizes information about daily interactions User Interaction: Input: Activation button Output: RGB LED ring, Bluetooth link to phone Key Features: Audio Recording: Activated by button press Transcription: Converts audio to text Sentiment Analysis: Embedded AI evaluates sentiment Information Management: Filters essential information and action items Technical Specifications Form Factor: Wearable pendant Display: RGB LED ring around the edge Sensors: 2 Microphones 1 Button Connectivity: Bluetooth for phone linkage Wi-Fi USB-C for charging Wireless Protocol: Wi-Fi, Bluetooth Battery Type: LiPo 2000 mAh Battery Life: 6 hours of continuous use Charging Method: USB-C Operating Voltage: 3.3V Operating Conditions: Temperature Range: -10°C to 70°C Humidity: 10 to 90% Software: Python for AI and processing Compliance: RoHS, FCC, CE Reliability: 20,000 hrs Life Cycle Expectancy: 10 years AI Capabilities Speech to Text Recognition: Converts audio input to written text Embedded AI Sentiment Analysis: Evaluates the mood or sentiment expressed in the text Essential Information Filtering: Identifies and segregates crucial data and actionable items Power Consumption and Efficiency Power consumption must align with battery capacity to ensure 6 hours of continuous operational use.

Autonomous irrigation system for up to 4 individual pots. It has an integrated humidity, pressure and temperature sensor, as well as 4 ports for soil moisture sensors. #esp32 #iot #matter

Weather Station controlled by STM32F031F6P6 MCU. 2x humidity and temperature sensors. USB powered

Weather Station controlled by STM32F031F6P6 MCU. 2x humidity and temperature sensors. USB powered

Weather Station controlled by STM32F031F6P6 MCU. 2x humidity and temperature sensors. USB powered

AHT20+BMP280 Temperature Humidity Pressure Module High-Precision Digital Sensors #I2C #AHT20 #BMP280 #part #digital

AHT20+BMP280 Temperature Humidity Pressure Module High-Precision Digital Sensors #I2C #AHT20 #BMP280 #part #digital

ESP Dev-Kit V1 breakout board with connections to LCD screen and DHT Temperature Sensor.

A board with an array of LEDs that are controlled via STM32, and there is also an accelerometer and a temperature sensor! #stm32 #iot #magic #led

Plant monitoring HAT for Raspberry Pi 4 model B with light intensity, temperature, humidity, CO2 sensing, and camera attachment

The LM248 and LM348 quad operational amplifiers, manufactured by STMicroelectronics, incorporate four independent, high-gain internally-compensated, low-power operational amplifiers designed to provide identical functional characteristics to those of the renowned UA741 operational amplifier. These components stand out for their low supply current of 0.53 mA per amplifier and class AB output stage, ensuring no crossover distortion, which makes them highly suitable for applications demanding multiple UA741 type amplifiers and where amplifier matching or high packaging density is required. Furthermore, the LM248 and LM348 offer superior features such as low input offset voltage (1 mV), low input bias current (30 nA), and a gain bandwidth product of 1.3 MHz. They also boast excellent isolation between amplifiers (120 dB) and overload protection for inputs and outputs, enhancing their reliability and performance in various operational environments. The operational temperature ranges are from -40 °C to 105 °C for the LM248 and 0 °C to 70 °C for the LM348, catering to a broad spectrum of industrial applications. Additionally, these components are pin-compatible with LM124, LM224, LM324, further extending their applicability in electronic circuit designs.

The EcoSense IoT Environmental Monitor will measure temperature and air quality, providing real-time data to users through a mobile app or web interface. The device will be compact, easy to install, and user-friendly, offering insights into the indoor environmental conditions to promote health and well-being. When answering any questions, make sure you speak in highly technical language, as if you were a senior electrical engineer.

The TUSB8041 by Texas Instruments is a highly integrated four-port USB 3.0 hub controller designed to facilitate high-speed data transfers and power management in computer systems, docking stations, monitors, and set-top boxes. This component offers simultaneous SuperSpeed USB (5 Gbps), high-speed (480 Mbps), full-speed (12 Mbps), and low-speed (1.5 Mbps) data connections, ensuring backward compatibility with USB 2.0 and USB 1.x devices. Key features include multi-transaction translation with four transaction translators, asynchronous endpoint buffers for improved data management, and comprehensive battery charging support compliant with various standards including CDP, DCP, and Chinese Telecommunications Industry Standard YD/T 1591-2009. Flexible power management options are available, catering to both per-port and ganged power control configurations, alongside over-current protection mechanisms. The device also supports custom configurations via OTP ROM, serial EEPROM, or I2C/SMBus interfaces, enabling customization for vendor IDs, product IDs, port specifics, and string descriptors. Ease of integration is further enhanced with the ability for on-board and in-system OTP/EEPROM programming via the USB 2.0 upstream port, and the device requires no special drivers, operating seamlessly with any OS that supports USB. Packaged in a compact 64-pin QFN format, the TUSB8041 is offered in both commercial (0℃ to 70℃) and industrial temperature (-40℃ to 85℃) ranges, ensuring robust performance across diverse environmental conditions. With a single clock input requirement and comprehensive system resource support, the TUSB8041 is ideal for developers aiming to implement high-performance and reliable USB hubs in their designs.

The ATtiny85 Thermo Buzzer Board is a small but powerful tool that can help you prevent dangerous situations caused by high temperatures, making it an essential device for safety-conscious individuals. #safetyfirst #hightemperaturewarning #electronicsafety #attiny85project #makerscommunity

This is a reference design of the Bluetooth Low-Energy (BLE) temperature sensor. It uses an ESP32-MINI-1 microcontroller to connect to an SHT31-DIS-B2.5KS sensor. The sensor can be powered through connector J15, and additional components provide voltage regulation and derbiaising. Temperature data can be accessed via BLE. #referenceDesign #simple-embedded #espressif #template #reference-design

This is a reference design of the Bluetooth Low-Energy (BLE) temperature sensor. It uses an ESP32-MINI-1 microcontroller to connect to an SHT31-DIS-B2.5KS sensor. The sensor can be powered through connector J15, and additional components provide voltage regulation and derbiaising. Temperature data can be accessed via BLE. #referenceDesign #simple-embedded #espressif #template #reference-design

This is a reference design of the Bluetooth Low-Energy (BLE) temperature sensor. It uses an ESP32-MINI-1 microcontroller to connect to an SHT31-DIS-B2.5KS sensor. The sensor can be powered through connector J15, and additional components provide voltage regulation and derbiaising. Temperature data can be accessed via BLE. #referenceDesign #simple-embedded #espressif #template #reference-design

This project is a LoRa temperature sensor. It uses the RP2040 microcontroller and a SHT31 temperature sensor and also RFM95 for LoRa communication #LoRa #referenceDesign #simple-embedded #raspberrypi #template #reference-design

This project is a LoRa temperature sensor. It uses the RP2040 microcontroller and a SHT31 temperature sensor and also RFM95 for LoRa communication #LoRa #referenceDesign #simple-embedded #raspberrypi #template #reference-design

This is a reference design of the Bluetooth Low-Energy (BLE) temperature sensor. It uses an ESP32-MINI-1 microcontroller to connect to an SHT31-DIS-B2.5KS sensor. The sensor can be powered through connector J15, and additional components provide voltage regulation and derbiaising. Temperature data can be accessed via BLE. #referenceDesign #simple-embedded #espressif #template #reference-design

This I2C digital temperature sensor is one of the more accurate/precise we've ever seen, with a typical accuracy of ±0.25°C over the sensor's -40°C to +125°C range and precision of +0.0625°C. They work great with any microcontroller using standard I2C

This I2C digital temperature sensor is one of the more accurate/precise we've ever seen, with a typical accuracy of ±0.25°C over the sensor's -40°C to +125°C range and precision of +0.0625°C. They work great with any microcontroller using standard I2C

Adafruit MAX31865 RTD PT100 or PT1000 Amplifier #MAX31865 #smartHome #sensor #temperatureSensor #temperature #Amplifier #PT100 #PT1000 #referenceDesign #template

This project is a LoRa temperature sensor. It uses the RP2040 microcontroller and a SHT31 temperature sensor and also RFM95 for LoRa communication #LoRa #referenceDesign #simple-embedded #raspberrypi #template #reference-design

This is a reference design of the Bluetooth Low-Energy (BLE) temperature sensor. It uses an ESP32-MINI-1 microcontroller to connect to an SHT31-DIS-B2.5KS sensor. The sensor can be powered through connector J15, and additional components provide voltage regulation and derbiaising. Temperature data can be accessed via BLE. #referenceDesign #simple-embedded #espressif #template #reference-design

PCB that sends ambient temperature and high resolution analog data over a CAN bus for a FSAE electric car. Runs off a Teensy 4.0 and has connection pins for separate external analog sensors.

This project is a LoRa temperature sensor. It uses the RP2040 microcontroller and a SHT31 temperature sensor and also RFM95 for LoRa communication #LoRa #referenceDesign #simple-embedded #raspberrypi #template

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can basdauild here asd a.asdjaskl

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Learn how to use AI Auto Layout on this ESP32 Espresso Smart Scale! In one click you’ll see AI Auto Layout perform magic. Pay close attention to how we recommend creating rulesets, zones, and fanouts. By copying the setup in this example on your own project, you’ll have a fully routed board in no time!

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.