A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

This project is a Pulse Width Modulation (PWM) Controller, built around an LM555 timer IC. It controls a load connected to a MOSFET, with adjustments via a potentiometer, and uses capacitors, resistors and diodes for various functions. #PWM #controller #project #Template #projectTemplate

A 83 key keyboard, Norwegian QWERTY/DVORAK ISO style. It's of course possible to use other languages, as the MX cherry switches will accept keycaps with whatever language you need. It uses 83 1N4148 diodes and three LED's for caps lock,scroll lock, and QWERTY/DVORAK. It also needs pin headers that accepts the pins from a Teensy++2.0

This project is a Gesture Light Switch Relay Reference Design. It involves an STM32 microcontroller (STMicroelectronics) that interacts with an APDS-9960 sensor (Broadcom) to detect hand gestures. The gesture data is used to control a Toshiba TLP175A relay and an Everlight tri-color LED to switch the light and change colors, respectively. Power is supplied by a Diodes Incorporated's AP2112K-3.3TRG1 regulator. #referenceDesign #edge-computing #edgeComputing #stm #relay #sensors #reference-design

This project is a Switched-Mode Power Supply (SMPS) design. The design incorporates an AC DC Converter (NCP1203D100R2), polarized capacitors, resistors, diodes, connectors, a transistor, a transformer and an integrated circuit. #AC #DC #POWER #NCP1203 #project

This project is a Gesture Light Switch Relay Reference Design. It involves an STM32 microcontroller (STMicroelectronics) that interacts with an APDS-9960 sensor (Broadcom) to detect hand gestures. The gesture data is used to control a Toshiba TLP175A relay and an Everlight tri-color LED to switch the light and change colors, respectively. Power is supplied by a Diodes Incorporated's AP2112K-3.3TRG1 regulator. #referenceDesign #edge-computing #edgeComputing #stm #relay #sensors #reference-design

This project is a H-Bridge Circuit used to control the rotation direction of a DC motor. It uses resistors, diodes, and transistors to alternately forward and reverse the current flow. #HBridge #project #Template #projectTemplate

This project is a Pulse Width Modulation (PWM) Controller, built around an LM555 timer IC. It controls a load connected to a MOSFET, with adjustments via a potentiometer, and uses capacitors, resistors and diodes for various functions. #PWM #controller #project #Template #projectTemplate

Programmable USB Type‐C Controller with Power Delivery(PD) support. Include ESD Protection Diodes. #project-template #USB #typec #powerdelivery #template

This is a simple Bridge Rectifier project using 4 rectifying diodes and 2 filtering capacitors #BridgeRectifier #rectifier #AC #DC #project

RGBW SMD,5x5mm Light Emitting Diodes (LED) ROHS #LED#Addressable

This project is a reference design utilizing Texas Instruments' PGA300ARHHR, a precision analog and digital IC, for signal processing. The circuit also includes a Diodes Incorporated's FZT603QTA Transistor, passive components like resistors and capacitors, and connectors from JST Sales America Inc. #project #referenceDesign #industrialsensing #texas-instruments #template #reference-design

A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

make this for me now # Device Summary & Specification Sheet ## 1. Overview A rugged, Arduino-Uno-and-Raspberry-Pi-style single-board micro-PC featuring: - Smartphone-class CPU (Snapdragon 990) - USB-C Power Delivery + 4×AA alkaline backup + ambient-light harvester - On-board Arduino-Uno-compatible ATmega328P - External NVMe SSD via USB3 bridge & optional Thunderbolt 3 eGPU support - 5× USB 3.0 ports, HDMI in/out, Gigabit Ethernet & SFP fiber, Wi-Fi, Bluetooth, LoRa - 0.96″ OLED status display, 3.5 mm audio jack with codec --- ## 2. Key Specifications | Category | Specification | |--------------------|-------------------------------------------------------------------------------| | CPU | Snapdragon 990, octa-core up to 2.84 GHz | | Memory | 6 GB LPDDR4x DRAM | | Storage Interface | PCIe Gen3 ×4 → M.2 NVMe + USB 3.1 Gen1 bridge | | MCU | ATmega328P (Arduino-Uno-compatible) | | Power Input | USB-C PD up to 20 V/5 A; 4×AA alkaline backup; ambient-light photodiode boost | | Power Rails | 12 V, 5 V, 3.3 V, 1.8 V, 1.2 V via buck/buck-boost regulators | | USB Hub | 5× USB 3.0 downstream ports | | Display | 0.96″ 128×64 OLED via I²C/SPI | | Networking | 1 × Gigabit RJ45; 1 × SFP fiber; Wi-Fi 802.11ac + Bluetooth; LoRa SX1276 | | Video I/O | HDMI 2.0 input (RX) & output (TX) | | Audio | 3.5 mm jack + TLV320AIC3101 codec; Bluetooth audio | | Form Factor | Raspberry Pi–style header + Arduino-Uno shield headers; 4× standoff mounts | --- ## 3. Complete Parts List | Part | Function | Qty | |------------------------------------------------------------------------------------------------|-----------------------------------------------|-----| | [Snapdragon 990](https://www.flux.ai/search?type=components&q=Snapdragon%20990) | Main application CPU | 1 | | [LPDDR4x DRAM](https://www.flux.ai/search?type=components&q=LPDDR4x%20DRAM) | System memory | 1 | | [eMMC 64GB](https://www.flux.ai/search?type=components&q=eMMC%2064GB) | On-board storage | 1 | | [M.2 NVMe Connector](https://www.flux.ai/search?type=components&q=M.2%20NVMe%20Connector) | External SSD interface | 1 | | [JMS583](https://www.flux.ai/search?type=components&q=JMS583) | PCIe→USB 3.1 bridge for NVMe | 1 | | [Titan Ridge](https://www.flux.ai/search?type=components&q=Titan%20Ridge) | Thunderbolt 3/eGPU controller | 1 | | [STUSB4500](https://www.flux.ai/search?type=components&q=STUSB4500) | USB-C Power-Delivery controller | 1 | | [LTC4412](https://www.flux.ai/search?type=components&q=LTC4412) | Ideal-diode OR-ing | 1 | | [LTC3108](https://www.flux.ai/search?type=components&q=LTC3108) | Ambient-light (solar) energy harvester | 1 | | [Battery Holder 4×AA](https://www.flux.ai/search?type=components&q=Battery%20Holder%204xAA) | Alkaline backup power | 1 | | [TPS53318](https://www.flux.ai/search?type=components&q=TPS53318) | 6 V→5 V synchronous buck regulator | 1 | | [MCP1700-3302E/TO](https://www.flux.ai/search?type=components&q=MCP1700-3302E/TO) | 6 V→3.3 V LDO | 1 | | [TPS63060](https://www.flux.ai/search?type=components&q=TPS63060) | Buck-boost for 12 V rail (eGPU power) | 1 | | [ATmega328P](https://www.flux.ai/search?type=components&q=ATmega328P) | Arduino-Uno microcontroller | 1 | | [ESP32-WROOM-32](https://www.flux.ai/search?type=components&q=ESP32-WROOM-32) | Wi-Fi + Bluetooth co-processor | 1 | | [SX1276](https://www.flux.ai/search?type=components&q=SX1276) | LoRa transceiver | 1 | | [TUSB8041](https://www.flux.ai/search?type=components&q=TUSB8041) | 5-port USB 3.0 hub IC | 1 | | [Ethernet PHY](https://www.flux.ai/search?type=components&q=Ethernet%20PHY) | Gigabit Ethernet physical transceiver | 1 | | [SFP Cage](https://www.flux.ai/search?type=components&q=SFP%20Cage) | Fiber-optic SFP module connector | 1 | | [TDA19978](https://www.flux.ai/search?type=components&q=TDA19978) | HDMI 2.0 receiver (input) | 1 | | [TFP410](https://www.flux.ai/search?type=components&q=TFP410) | HDMI 2.0 transmitter (output) | 1 | | [TLV320AIC3101](https://www.flux.ai/search?type=components&q=TLV320AIC3101) | Audio codec for 3.5 mm jack & Bluetooth audio | 1 | | [Audio Jack 3.5mm](https://www.flux.ai/search?type=components&q=Audio%20Jack%203.5mm) | Headphone/mic port | 1 | | [SSD1306 OLED](https://www.flux.ai/search?type=components&q=SSD1306%20OLED) | Status display | 1 | --- ## 4. High-Level Design & Implementation Steps 1. **Schematic Creation** - Section off blocks: CPU + memory, power-supply, NVMe/USB bridge, MCU, wireless, USB hub, video, audio, I/O headers. - Place all parts from the list and wire per respective datasheet reference circuits. 2. **Power System** - Implement USB-C PD with STUSB4500 → buck/buck-boost & LDO rails. - Add LTC4412 to OR-ing battery pack into 6 V bus. - Include LTC3108 harvest input to 6 V bus (no recharge to AA). - Add decoupling & bulk caps per regulator datasheets; PTC fuses & ESD diodes on inputs. 3. **SoC & High-Speed Interfaces** - Break out Snapdragon 990 BGA with DDR4 routing (point-to-point). - Route PCIe Gen3 lanes to M.2 slot via JMS583 and to Titan Ridge for TB/eGPU. - Follow high-speed layout guidelines: impedance, length matching, EMI filters. 4. **MCU & Expansion Headers** - Place ATmega328P with UNO-style 2.54 mm headers; add ISP 6-pin, I²C pull-ups, reset circuit. 5. **Connectivity Blocks** - USB hub: TUSB8041 + ESD + chokes → five USB-A 3.0 ports. - Ethernet: RJ45 + magnetics + PHY; SFP cage + PHY/SFP interface. - Wireless: ESP32 module pad + SX1276 + antenna matching; program pads. 6. **Video & Audio** - HDMI RX (TDA19978) & TX (TFP410) blocks with TMDS ESD & termination. - Audio codec + 3.5 mm jack; route differential audio lines; add ESD. 7. **Display & Indicators** - SSD1306 OLED on I²C; add pull-ups & backlight power if needed. - LEDs for power, charge, status. 8. **PCB Layout & Mechanical** - Follow Raspberry Pi 2×20 header footprint & UNO shield hole pattern. - Add reinforcement for rugged use; standoffs at corners. - Define 4-layer stackup: • Top: signal • L2: GND • L3: PWR • Bottom: signal 9. **DRC/ERC Reviews** - Run ERC for decoupling, pull-ups, power nets. - Run DRC for high-speed clearance, differential pairs, via aspect ratios. 10. **Fabrication & Testing** - Export Gerbers, IPC-2581, BOM. - Prototype assembly; verify power sequencing, rails, interfaces. - Functional tests: USB-C PD negotiation, NVMe throughput, eGPU over TB3, wireless comm, audio, OLED. --- This spec sheet and part list should guide your Flux schematic and PCB layout workflow through to fabrication and validation. Let me know if you’d like to deep-dive into any specific block or review datasheet details next!

SOT-23-5 is a small 5-pin Surface Mount Device (SMD) package with a body size of 3mm x 1.4mm and a lead pitch of 0.95mm. The package has a low profile and is commonly used for small signal transistors and diodes. #part #template

A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

Diode double balanced mixer. In its simplest form it consists of two unbalanced to balanced baluns and a diode ring consisting of four diodes. #project #Template #projectTemplate

A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

Programmable USB Type‐C Controller with Power Delivery(PD) support. Include ESD Protection Diodes. #project-template #USB #typec #powerdelivery #template

qr code scanner - model - symbol 2 rpi cams atmega connections leds + resistor + necessary logic gates diodes, capacitors, resistors etc wherever needed

This project is a Pulse Width Modulation (PWM) Controller, built around an LM555 timer IC. It controls a load connected to a MOSFET, with adjustments via a potentiometer, and uses capacitors, resistors and diodes for various functions. #PWM #controller #project #Template #projectTemplate

This project is a Pulse Width Modulation (PWM) Controller, built around an LM555 timer IC. It controls a load connected to a MOSFET, with adjustments via a potentiometer, and uses capacitors, resistors and diodes for various functions. #PWM #controller #project #Template #projectTemplate

A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

Programmable USB Type‐C Controller with Power Delivery(PD) support. Include ESD Protection Diodes. #SubLayout #USB #typec #powerdelivery

makes a circuit which has transistors, diodes, relays, IC Timer, LED, which first turns on a green LED lit from 0 to 35 degrees Celsius then turns off and turns on a yellow LED from 35 degrees Celsius to 50 degrees Celsius then turns off the yellow and turns on the red at 50 degrees or more which in turn will turn on an oscillator circuit with IC555 and a Buzzer. In addition it should turn on an exhaust fan at 110 VAC. Translated with DeepL.com (free version)