Power Switch/Driver 1:1 N-Channel 1.35A 28-WQFN (4x5) The TPS274160 device is a smart high-side switch with four integrated 160-mΩ NMOS power FETs and a chargepump to drive the gates. The device offers robust protection and diagnostic features to drive various loads (inductive, capacitive, and resistive) such as low wattage bulbs, LEDs, relays, solenoids, heaters, and sub-modules. The part enables flexible, multi-channel output configurations through paralleling channels and is in a very small WQFN package to enable usage in space constrained applications. The device is protected against short circuit events and over-temperature events, safely shutting off the output during fault events. The device also implements an external adjustable current limiting feature. This feature improves the reliability of the system by reducing inrush current when driving large capacitive loads and minimizing overload current thereby eliminating system supply brown out condition. The device also integrates diagnostic features like output current monitoring (version B) and open load detection to enable improved intelligence in modules and to enable predictive maintenance functionality. • Quad-channel 160-mΩ smart high-side switch • Wide DC operating voltage range: 5 V to 36 V – 50-V absolute maximum voltage • Accurate adjustable current limiting (250 mA to 4 A) • Intelligent diagnostic features – TPS274160A: Open-drain fault output – TPS274160B: Analog current sense – Open-load or short to supply detection in the off-state • Robust protection features – Short-circuit protection – Inductive load flyback clamp – Undervoltage lockout (UVLO) protection – Loss of GND protection • Excellent ESD protection on VS and OUT pins – ±8/±15 kV IEC 61000-4-2 ESD contact/air discharge • Available in small and 28-pin leadless QFN packages • Functional Safety-Capable – Documentation available to aid functional safety system design 2 Applications • Digital output modules • Standalone remote I/O • Motor drives • Solenoid or valve drive #TexasInstruments #TPS274160BRLHR #HighSideSwitch #SmartSwitch #IndustrialAutomation #PowerManagement #LoadDriver #CurrentLimiting #ProtectionIC #IndustrialControl #RemoteIO #SolenoidDriver #MotorDrive #EmbeddedSystems #ElectronicsDesign

IC SURGE STOPPER 2.7V~18V WSON-8-EP(2x2) TPS259530DSGT is a highly integrated eFuse (electronic fuse) from Texas Instruments designed to provide advanced circuit protection and power management for systems operating from 2.7 V to 18 V. It integrates a low-resistance MOSFET, adjustable current limiting, fast overvoltage protection, inrush current control, and thermal shutdown features, making it ideal for hot-swap, industrial, consumer electronics, storage, and adapter-powered applications. Key Features Wide input voltage range: 2.7 V to 18 V 34 mΩ typical integrated MOSFET on-resistance Adjustable current limit from 0.5 A to 4 A Fast overvoltage protection with 5 µs typical response time Adjustable undervoltage lockout (UVLO) Adjustable output slew rate (dV/dt) for inrush current control Load current monitor (ILM) output Fault indication (FLT) output Overtemperature protection (OTP) Hot-swap and hot-plug capable IEC 62368-1 certified and UL recognized Compact 8-pin WSON/DSG package Hashtags #TPS259530DSGT #TexasInstruments #eFuse #HotSwapController #CircuitProtection #PowerManagement #OvervoltageProtection #CurrentLimiting #InrushCurrentControl #IndustrialElectronics #EmbeddedSystems #HardwareDesign #ElectronicsEngineering #PowerSupplyProtection #PCBDesign

Green 568nm LED Indication - Discrete 2.2V Radial The WP483GDT is a through-hole green light-emitting diode designed for general-purpose visual indication and low-power lighting applications. It emits a visible green wavelength when forward biased and is commonly used in status indicators, signal displays, and basic illumination circuits. The device is built with a durable epoxy lens package that provides mechanical protection and enhances light output visibility. It is suitable for use in a wide range of electronic systems, including consumer electronics, control panels, and embedded designs. Device Overview The component is a standard discrete LED with a two-lead configuration consisting of an anode and a cathode. It operates by converting electrical energy into light through electroluminescence. The emitted color falls within the green spectrum, making it appropriate for applications requiring clear visual signaling without excessive brightness or power consumption. Electrical Characteristics The LED operates under forward bias conditions, with a typical forward voltage in the range expected for green LEDs. It supports low current operation while maintaining consistent luminous output. Reverse voltage tolerance is limited, and proper polarity must be observed to prevent damage. Current-limiting resistors are required in circuit integration to ensure safe operation. Optical Characteristics The device produces a green light output with a defined luminous intensity and viewing angle based on its lens shape and internal structure. The epoxy lens may be diffused or clear, affecting the spread and focus of the emitted light. Brightness is dependent on the forward current applied. Mechanical Characteristics The LED is housed in a standard round through-hole package, compatible with typical PCB mounting. Leads are spaced to fit common board layouts and can be soldered directly. The epoxy body provides insulation and environmental protection while maintaining optical clarity. Thermal Considerations The device is designed for low power dissipation but should be operated within recommended limits to avoid overheating. Adequate spacing and proper current control help maintain thermal stability and prolong device lifespan. Applications The WP483GDT is suitable for indicator lights in electronic devices, status displays in control systems, educational and hobby electronics, and general-purpose signaling applications where green illumination is required. Compliance and Handling The component should be handled using standard ESD precautions. Storage and soldering conditions should follow typical LED handling practices to maintain performance and reliability. #commonpartslibrary #led #green

2.2 kOhms ±5% 0.25W, 1/4W Through Hole Resistor Axial Automotive AEC-Q200 Carbon Film he CFR-25JB-52-2K2 is a carbon film through-hole resistor manufactured by Yageo. It is designed for general-purpose current limiting, voltage division, biasing, filtering, and signal conditioning applications in electronic circuits. The resistor features a durable carbon film construction, axial lead configuration, and flame-resistant coating, providing stable electrical performance and reliable operation across a wide temperature range. It is suitable for consumer, industrial, automotive, and embedded electronic systems. Manufacturer Yageo Part Number CFR-25JB-52-2K2 Product Series CFR Component Type Carbon Film Resistor Resistance Value 2.2 kΩ Resistance Tolerance ±5% Rated Power 0.25 W (1/4 W) Technology Carbon Film Mounting Type Through Hole Package Style Axial Leaded Number of Terminals 2 Operating Temperature Range -55°C to +155°C Temperature Coefficient -500 ppm/°C to +350 ppm/°C Working Voltage 250 V Overload Voltage 500 V Body Dimensions 2.4 mm Diameter × 6.3 mm Length Compliance RoHS Compliant Qualification AEC-Q200 Automotive Qualified Key Features Carbon film resistor technology for stable performance 2.2 kΩ resistance value suitable for general-purpose applications 1/4 W power rating ±5% resistance tolerance Axial through-hole package for easy assembly and prototyping Wide operating temperature range Automotive AEC-Q200 qualified Low-cost and reliable passive component solution Suitable for voltage divider, pull-up, pull-down, current-limiting, and signal-conditioning circuits RoHS compliant construction for environmentally conscious designs High working voltage capability for low-power electronic applications #Resistor #CarbonFilm #Yageo #ThroughHole #AxialResistor #PassiveComponent #AECQ200 #AutomotiveElectronics #CFRSeries #CFR25JB522K2 #ElectronicComponents #PCBDesign #EmbeddedSystems

1/1 Transceiver Half RS422, RS485 8-SOIC The MAX3483, MAX3485, MAX3486, MAX3488, MAX3490, and MAX3491 are 3.3V, low-power transceivers for RS-485 and RS-422 communication. Each part contains one driver and one receiver. The MAX3483 and MAX3488 feature slew-rate-limited drivers that minimize EMI and reduce reflections caused by improperly terminated cables, allowing error-free data transmission at data rates up to 250kbps. The partially slew-rate-limited MAX3486 transmits up to 2.5Mbps. The MAX3485, MAX3490, and MAX3491 transmit at up to 10Mbps. Drivers are short-circuit current-limited and are protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high-impedance state. The receiver input has a fail-safe feature that guarantees a logic-high output if both inputs are open circuit. The MAX3488, MAX3490, and MAX3491 feature fullduplex communication, while the MAX3483, MAX3485, and MAX3486 are designed for half-duplex communication. Applications ● Low-Power RS-485/RS-422 Transceivers ● Telecommunications ● Transceivers for EMI-Sensitive Applications ● Industrial-Control Local Area Networks ● Operate from a Single 3.3V Supply— No Charge Pump! ● Interoperable with +5V Logic ● 8ns Max Skew (MAX3485/MAX3490/MAX3491) ● Slew-Rate Limited for Errorless Data Transmission (MAX3483/MAX3488) ● 2nA Low-Current Shutdown Mode (MAX3483/MAX3485/MAX3486/MAX3491) ● -7V to +12V Common-Mode Input Voltage Range ● Allows up to 32 Transceivers on the Bus ● Full-Duplex and Half-Duplex Versions Available ● Industry Standard 75176 Pinout (MAX3483/MAX3485/MAX3486) ● Current-Limiting and Thermal Shutdown for Driver Overload Protection