CF CompactFlash Connector 101D-TAAA-R01

CF CompactFlash Connector CFH-L3C1LBL01MN0 SD-SMD_CFH-L3C1LBL01MN0 LCSC Part Number: C444350 JLCPCB Part Class: Extended Part Manufactured by UMaxconn(友贸)

50 Position Card Connector CompactFlash® - Type I, II Surface Mount, Right Angle Gold 1734451-1 is a 50-position CompactFlash (CF) card connector from TE Connectivity. It is a low-profile, right-angle, surface-mount connector designed for interfacing CompactFlash Type I and Type II memory cards with a printed circuit board (PCB). The connector features gold-plated contacts for reliable signal transmission and durability, making it suitable for embedded systems, industrial equipment, data acquisition devices, and legacy storage applications. This part is currently marked as obsolete by the manufacturer. Key Features 50-position CompactFlash card connector Supports CompactFlash Type I and Type II cards Right-angle PCB mounting orientation Surface-mount termination (SMT) 1.27 mm contact pitch Gold-plated contact mating area Brass contacts with nickel underplating Low-profile connector design Maximum contact current rating: 0.5 A per contact Thermoplastic housing, UL 94V-0 rated Designed for signal transmission applications Board-mount connector with hold-down feature Obsolete product status #TEConnectivity #CompactFlash #CFCardConnector #MemoryConnector #PCCardSocket #EmbeddedSystems #SMTConnector #RightAngleConnector #PCBDesign #ElectronicComponents #IndustrialElectronics #DataStorage #ConnectorSolution #HardwareDesign #ObsoletePart

ARM® Cortex®-M4 series Microcontroller IC 32-Bit Single-Core 168MHz 1MB (1M x 8) FLASH 64-LQFP (10x10) Arm® Cortex®-M4 32b MCU+FPU, 210DMIPS, up to 1MB flash/192+4KB RAM, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm. interfaces, and camera Includes ST state-of-the-art patented technology • Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator) allowing 0-wait state execution from flash memory, frequency up to 168 MHz, memory protection unit, 210 DMIPS/ 1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions • Memories – Up to 1 Mbyte of flash memory – Up to 192+4 Kbytes of SRAM including 64- Kbyte of CCM (core coupled memory) data RAM – 512 bytes of OTP memory – Flexible static memory controller supporting CompactFlash™, SRAM, PSRAM, NOR and NAND memories • LCD parallel interface, 8080/6800 modes • Clock, reset, and supply management – 1.8 V to 3.6 V application supply and I/Os – POR, PDR, PVD and BOR – 4-to-26 MHz crystal oscillator – Internal 16 MHz factory-trimmed RC (1% accuracy) – 32 kHz oscillator for RTC with calibration – Internal 32 kHz RC with calibration • Low-power operation – Sleep, Stop, and Standby modes –VBAT supply for RTC, 20×32-bit backup registers + optional 4 KB backup SRAM • 3×12-bit, 2.4 MSPS A/D converters: up to 24 channels and 7.2 MSPS in triple interleaved mode • 2×12-bit D/A converters • General-purpose DMA: 16-stream DMA controller with FIFOs and burst support • Up to 17 timers: up to twelve 16-bit and two 32- bit timers up to 168 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input • Debug mode – Serial wire debug (SWD) & JTAG interfaces – Cortex-M4 Embedded Trace Macrocell™ • Up to 140 I/O ports with interrupt capability – Up to 136 fast I/Os up to 84 MHz – Up to 138 5 V-tolerant I/Os • Up to 15 communication interfaces – Up to 3 × I2C interfaces (SMBus/PMBus) – Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control) – Up to 3 SPIs (42 Mbits/s), 2 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock – 2 × CAN interfaces (2.0B Active) – SDIO interface • Advanced connectivity – USB 2.0 full-speed device/host/OTG controller with on-chip PHY – USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI – 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII #commonpartslibrary #integratedcircuit #microcontroller