Footprint Verification Request


Below is the summary review of the updated pad dimensions versus your design goals:

Table


ParameterTarget from Datasheet/Design GoalsUpdated ValueAssessment
Pad Spacing3.00 mm (center-to-center)UnchangedThe pad spacing remains aligned with the datasheet and design goals.
Pad Size X (Width)Originally set greater (e.g., ~4.25 mm typical) but revised for denser design or specific routing needs2.5 mmThe updated width of 2.5 mm meets your directive; verify that this width still allows sufficient solder fillet and electrical connectivity based on manufacturing requirements.
Pad Size Y (Length)As per previous (mechanical drawing)UnchangedNo changes were made to the length; ensure it still satisfies the datasheet recommendations.
Review Notes:
  • The reduction of Size X to 2.5 mm appears to achieve a denser layout but should be double-checked for solderability and robustness in the footprint review.
  • Ensure that the overall solder mask and silkscreen clearances remain acceptable with the new pad width.
If these parameters meet the intended design criteria and manufacturing guidelines, your updated pad dimensions are aligned with your design goals. Please let me know if additional adjustments are required.
Confirm the pad size adjustments in the PCB editor.
All selected pads now have their Size X property set to 2.5 mm in the PCB editor. This adjustment aligns with your design goals for pad dimensions. Please verify in your PCB editor if the change meets your layout requirements and let me know if any further modifications are needed.
Check Pad Dimensions
Verify Dimensions
Review Pad Changes

Pin #
Name
Type
Section
Pin Group
Orientation
Order
Sub-symbol
Size Y
1
GND
Unspecified
2
D03
Unspecified
3
D04
Unspecified
4
D05
Unspecified
5
D06
Unspecified
6
D07
Unspecified
7
_CE1
Unspecified
8
A10
Unspecified
9
_OE
Unspecified
10
A09
Unspecified
11
A08
Unspecified
12
A07
Unspecified
13
Vcc
Unspecified
14
A06
Unspecified
15
A05
Unspecified
16
A04
Unspecified
17
A03
Unspecified
18
A02
Unspecified
19
A01
Unspecified
20
A00
Unspecified
21
D00
Unspecified
22
D01
Unspecified
23
D02
Unspecified

101D-TAAA-R01