PM254-2-10-Z-8.5 is a through-hole pin header connector designed for reliable board-to-wire or board-to-board interconnection in electronic and embedded systems. The connector features a durable thermoplastic housing with metal contact terminals engineered for stable electrical conductivity, mechanical strength, and long-term reliability in industrial and consumer electronic applications. This connector series is commonly used in power distribution, signal routing, module interfacing, and PCB expansion applications where secure and removable connections are required. Its standardized pin spacing and vertical mounting configuration support compatibility with a wide range of mating connectors, jumper systems, and cable assemblies. The PM254-2-10-Z-8.5 connector is suitable for automated assembly processes and provides dependable performance in embedded controllers, development boards, industrial automation equipment, communication systems, and general-purpose electronic hardware. The robust contact structure ensures stable connectivity under repeated insertion cycles and varying environmental conditions. #commonpartslibrary #connector #pinheader #interconnect #throughhole #embeddedhardware #electronicscomponents #pcbdesign #industrialelectronics #boardtoboardconnector

3 Position Wire to Board Terminal Block Horizontal with Board 0.138" (3.50mm) Through Hole The EBWA-03-A is typically identified as a 3-position board-to-wire connector (wafer/header type) used for making compact and reliable electrical connections between a PCB and external wiring harnesses. It is commonly used in consumer electronics, industrial control boards, and embedded systems, especially where a small, low-profile connector is required for signal or low-power connections. Note: The exact manufacturer and series naming for “EBWA-03-A” can vary depending on supplier, so slight differences in mechanical or electrical specs may exist across sources. 01x03 terminal block 3.50mm #CommonPartsLibrary #Connector #Terminal block

Connector Header Through Hole 13 position 0.100" (2.54mm) pin header 1x13 2.54mm The TSW-113-07-F-S is a surface-mount, dual-row header designed for reliable board-to-board or board-to-wire connections in compact electronic assemblies. It is commonly used in applications where space efficiency, mechanical stability, and consistent electrical performance are required. The component features a low-profile design suited for automated assembly processes and is compatible with standard reflow soldering techniques. Configuration and Design This connector is configured as a dual-row header with a fine pitch layout, enabling high-density interconnections while maintaining signal integrity. The surface-mount termination style allows for direct placement onto printed circuit boards without the need for through-hole mounting, supporting modern manufacturing practices and reducing assembly time. Material and Construction The housing is typically constructed from a high-temperature thermoplastic material suitable for reflow soldering environments. Contacts are manufactured from a conductive alloy and are plated to enhance durability, corrosion resistance, and electrical conductivity. The plating material is selected to ensure long-term reliability under normal operating conditions. Electrical Characteristics The connector supports low-voltage signal transmission and is designed to maintain consistent contact resistance throughout its service life. It is suitable for general-purpose electronic applications where stable electrical connections are essential. Mechanical Properties The component is engineered to provide secure mating retention and resistance to mechanical stress during handling and operation. Its surface-mount design contributes to improved alignment and stability on the PCB, especially in high-vibration environments when properly soldered. Environmental Considerations The device is capable of operating within standard commercial temperature ranges and is designed to withstand typical environmental conditions encountered in electronic assemblies. Materials used are compliant with common industry standards for environmental safety and manufacturing. #commonpartslibrary #connector #header

Connector Header Through Hole 6 position 0.100" Pin Header 1x06 2.54mm PinHeader 1x6 2.54mm The TSW-106-07-G-S is a through-hole vertical header designed for board-to-board and board-to-wire interconnection in electronic systems. It is part of a precision connector series known for high reliability, consistent mechanical alignment, and excellent electrical performance. The component is commonly used in applications requiring modular connectivity, prototyping flexibility, and secure signal routing between printed circuit boards or peripheral interfaces. Its design supports repeated mating cycles while maintaining stable contact integrity, making it suitable for both development and production environments. Functional Description This component functions as a single-row header that provides a direct electrical interface between a printed circuit board and a mating connector or cable assembly. It enables straightforward signal or power routing through plated pins that are soldered into the PCB. The vertical orientation allows perpendicular mating, supporting compact and efficient board layouts. The connector is designed to ensure proper alignment and retention during mating, reducing the risk of intermittent connections. Electrical Characteristics The header supports low-voltage signal transmission and moderate current levels typical of board-level interconnects. It offers low contact resistance to maintain signal integrity and efficient current flow. The contact system is designed to provide consistent electrical performance across repeated insertions, ensuring reliability in both signal and power applications. Mechanical Characteristics The component features a robust insulating housing that maintains pin alignment and structural integrity during handling and operation. The contact pins are fabricated from conductive material and plated to enhance durability, conductivity, and مقاومت to corrosion. The through-hole mounting style provides strong mechanical anchoring to the printed circuit board, improving resistance to mechanical stress and vibration. The design supports reliable mating with compatible connectors and ensures long service life. Environmental Characteristics The TSW-106-07-G-S is constructed using materials that provide stable performance under typical environmental conditions encountered in electronic assemblies. It is designed to withstand standard temperature ranges and environmental stresses such as humidity and mechanical handling, maintaining electrical and mechanical reliability over time. Applications This header is widely used in embedded systems, industrial electronics, development platforms, communication equipment, and general-purpose PCB interconnect applications. It is especially suited for designs requiring modular connectivity, easy assembly, and dependable signal transfer. Summary The TSW-106-07-G-S from Samtec is a reliable through-hole header solution that combines mechanical durability with stable electrical performance. Its straightforward design, compatibility with standard interconnect systems, and suitability for a wide range of applications make it a common choice for board-level connectivity in modern electronic designs. #CommonPartsLibrary #Connector #Header #TSW

Connector Header Through Hole 4 position 0.100" (2.54mm) UART header 1x4 2.54mm Single-row, through-hole male pin header with 4 positions and 2.54 mm pitch. Designed for board-to-wire or board-to-board interconnect applications such as UART interfaces. Mechanical Specifications Number of Positions: 4 Number of Rows: 1 Pitch: 2.54 mm (0.100") Mounting Style: Through Hole Mounting Angle: Straight (Vertical) Contact Gender: Male (Pin) Termination Type: Solder Pin Housing Material: Polybutylene Terephthalate (PBT) Housing Color: Black Electrical Specifications Current Rating: 4.3 A – 6.3 A (per pin, depending on conditions) Voltage Rating: 450 VAC – 550 VAC Contact Resistance: (Typical for series, not specified exact) Insulation Resistance: (Not specified) Material & Plating Contact Material: Phosphor Bronze Contact Plating: Gold Flammability Rating: UL94 V-0 Environmental & Compliance RoHS Compliance: Yes Country of Origin: USA Packaging Packaging Type: Bulk Factory Pack Quantity: 1 Series Information Series: TSW (Samtec Pin Strip Header Series) Product Type: Headers & Wire Housings Typical Applications UART / Serial communication headers Microcontroller programming interfaces General-purpose 2.54 mm interconnects Prototyping and development boards #commonpartslibrary #connector

CONN HEADER TH R/A 4POS 2.5mm The CS-1001R-04ALOCK is a single-row, 4-pin male header with a 2.5 mm pitch. It is intended for use with matching XH-series wire housings and crimp terminals, providing a reliable board-to-wire connection in consumer electronics, industrial equipment, and embedded systems. The right-angle mounting configuration allows the cable to exit parallel to the PCB surface, helping reduce vertical space requirements. Key Features 4-position (1×4) male header 2.50 mm pitch connector system Right-angle through-hole mounting Locking design for secure mating retention Compatible with XH-series wire housings Rated current: up to 3 A Rated voltage: up to 250 V Operating temperature: −40°C to +105°C Single-row configuration RoHS compliant Housing material based on PA66 (Nylon) with flame-retardant options depending on the variant. #CommonPartsLibrary #Connector

Headers & Wire Housings HEADER 2POS 2.5MM Connector Header Through Hole, Right Angle 2 position 0.098" (2.50mm) IL-2P-S3FP2-1 is a 2-position, 2.50 mm pitch right-angle through-hole header connector from the IL Series by JAE Electronics. It is designed for board-to-wire connections in compact electronic equipment and features a friction-lock mechanism to ensure reliable cable retention. The connector uses gold-plated brass contacts for enhanced conductivity and corrosion resistance, making it suitable for industrial, consumer, and embedded electronic applications. Key Features 2-position male header connector 2.50 mm pitch Right-angle through-hole mounting Board-to-wire connection style Friction-lock mating system for secure connection Gold-plated brass contacts for reliable electrical performance Shrouded design with one protective wall Polyamide (PA66/Nylon 6/6) housing UL94 V-0 flame-retardant material Compact single-row configuration Operating temperature range: -40°C to +85°C RoHS compliant and lead-free version available Suitable for power and signal connections in electronic equipment #CommonPartsLibrary #JAE #Connector #HeaderConnector #WireToBoard #ThroughHole #RightAngleConnector #ILSeries #2p50mmPitch #FrictionLock #ElectronicComponents #EmbeddedSystems #PCBDesign #HardwareDesign #RoHSCompliant

22 Position Receptacle Connector 0.059" (1.50mm) Surface Mount Tin 503154-2290 5031542290 is a 22-position surface-mount receptacle connector from the Molex CLIK-Mate series, designed for compact wire-to-board applications requiring secure locking and reliable electrical performance. Featuring a 1.50 mm pitch, dual-row configuration, and latch holder mechanism, it is ideal for use in industrial, automotive, medical, lighting, and general-purpose electronic equipment. The connector offers robust mechanical retention, pick-and-place compatibility, and operation over a wide temperature range. Key Features 22-position dual-row receptacle connector 1.50 mm pitch (CLIK-Mate series) Surface-mount (SMT) termination Secure latch holder locking mechanism Tin-plated copper alloy contacts Pick-and-place compatible for automated assembly Solder retention feature for improved manufacturing reliability Operating temperature range: -40°C to +105°C UL94 V-0 flame-retardant housing Suitable for automotive, industrial, medical, and lighting applications #CommonPartsLibrary #Connector #Molex #CLIKMate #WireToBoard #SMTConnector #BoardToWire #ElectronicConnector #IndustrialElectronics #AutomotiveElectronics #MedicalDevices #PCBDesign #InterconnectSolutions #5031542290

Connector Header Surface Mount 12 position 0.049" (1.25mm) 53398-1271 The 0533981271 is a board-to-wire connector assembly component designed to provide a reliable electrical and mechanical interface between a printed circuit board and discrete wire harnesses. It belongs to a compact connector system intended for applications requiring secure mating, efficient signal transmission, and ease of assembly. The component is engineered to support consistent electrical contact performance while maintaining a small footprint suitable for space-constrained designs. Its construction ensures dependable connectivity under typical operating conditions encountered in consumer electronics, industrial equipment, and embedded systems. Functional Description This connector component serves as part of a modular interconnect system, enabling termination of wires and subsequent mating to a corresponding board-mounted header. It provides stable retention and alignment during mating and unmating operations, ensuring consistent electrical continuity. The design supports straightforward integration into automated or manual assembly processes, facilitating efficient production workflows. Contact geometry and housing features are optimized to maintain reliable engagement and minimize the risk of intermittent connections. Electrical Characteristics The component is designed to support low-voltage signal and power transmission in compact electronic systems. It provides low contact resistance to ensure efficient current flow and stable signal integrity. Insulation materials are selected to maintain dielectric performance and prevent leakage under normal operating conditions. The connector system is suitable for typical electronic applications where consistent and reliable electrical performance is required. Mechanical Characteristics The connector features a durable housing constructed from engineered thermoplastic material, providing mechanical strength and resistance to environmental stress. Contact elements are formed from conductive alloys and finished to enhance conductivity and corrosion resistance. The design includes features that promote secure mating retention and proper alignment, reducing wear and ensuring longevity over repeated use. Its compact form factor supports high-density layouts on printed circuit boards. Environmental Characteristics The component is designed to operate reliably within standard environmental conditions encountered in electronic equipment. Materials used in the housing and contacts are selected for thermal stability and resistance to common environmental factors such as humidity and mechanical vibration. The connector system maintains performance over typical temperature ranges associated with consumer and industrial applications. Applications This connector is intended for use in electronic systems requiring compact and reliable wire-to-board interconnection. Common applications include consumer devices, industrial control systems, embedded modules, and communication equipment where dependable signal or power connectivity is essential. Summary The 0533981271 from Molex is a compact and reliable connector solution for board-to-wire applications. It offers consistent electrical performance, robust mechanical design, and ease of integration, making it well suited for modern electronic assemblies requiring dependable interconnect solutions. #commonpartslibrary #connector #header

The 532610271 is a Molex PicoBlade series wire-to-board connector header designed for compact electronic applications requiring reliable low-profile signal connections. It is a 2-position, single-row, surface-mount (SMT), right-angle header with a 1.25 mm pitch, commonly used in small consumer electronics, embedded systems, battery-powered devices, and compact PCB interconnects. This part belongs to the Molex PicoBlade (53261 series) family, which is optimized for high-density board-to-wire connections in space-constrained designs. Key Features Manufacturer: Molex Series: PicoBlade (53261 family) Connector Type: Wire-to-Board Header (Male Pins) Number of Positions: 2 pins (1×2 configuration) Pitch: 1.25 mm (high-density compact spacing) Mounting Type: Surface Mount (SMT), Right Angle Contact Type: Male blade terminals Current Rating: 1 A Voltage Rating: 125 V Operating Temperature: −40 °C to +105 °C Contact Material: Phosphor bronze Contact Plating: Tin (Sn) Flammability Rating: UL94 V-0 Package Style: Tape & Reel (for automated assembly) Typical Applications Compact consumer electronics Battery-powered devices IoT modules and embedded systems Sensor connections Portable medical or industrial devices Board-to-wire signal interconnects in tight PCB layouts #CommonPartsLibrary #Connector