DIY BMS using ATTINY841-SSU this hardware has a higher balance current, fuse and TVS diode to help with voltage spikes. Most importantly, an external crystal to the micro controller (attiny841) which means the device is more reliable in low voltage situations

The ATtiny45/85 USB Phone Charge Guard regulates charging by monitoring voltage, current, power, and energy, protecting Li-ion batteries.

Overview: BME280 Sensor data -> uSD card

Click on the bubble comments to see copilot design this project! Very impressed copilot routed all the SPI buses accurately for me.

TODO: Just realized that there is no footprint for the SD Card holder, gotta add that

Also, there needs to be a way to program the ATTINY841, Probably over UART?

ATTINY85 to toggle the LEDs of this cute board.

An ATtiny13 is more than sufficient to control almost any number of NeoPixels via an IR remote. The NeoController was originally developed as a tester for 800kHz NeoPixel strips. Since there was still so much flash left in the ATtiny13, an IR receiver was integrated so that some parameters can be controlled with an IR remote control. In this way, it is also suitable as a simple and cheap remote-controlled control unit for NeoPixels. Due to its small size (21.6mm x 11.4mm), it can be soldered directly to the LED strip without any problems. The power supply via a USB-C connection enables currents of up to 3A. There is still more than a third of the flash memory left for additional ideas.

DIY BMS using ATTINY841-SSU this hardware has a higher balance current, fuse and TVS diode to help with voltage spikes. Most importantly, an external crystal to the micro controller (attiny841) which means the device is more reliable in low voltage situations

The ATtiny85 Thermo Buzzer Board is a small but powerful tool that can help you prevent dangerous situations caused by high temperatures, making it an essential device for safety-conscious individuals. #safetyfirst #hightemperaturewarning #electronicsafety #attiny85project #makerscommunity

TinyCandle is a simple tealight candle simulation based on the ATtiny13A.

TinyCharger is an ATtiny25/45/85-based, single-cell Li-ion battery charger with selectable charging current limit (100mA - 1000mA) and an OLED display for monitoring.